ARCTIC P12 PWM PST - PC Fan, 120mm Fan, PC Case Fan with PWM Sharing Technology (PST), Pressure-optimised, quiet motor, Computer, Fan Speed: 200-1800 rpm (0 rpm <5%) - Black
FREE Shipping
ARCTIC P12 PWM PST - PC Fan, 120mm Fan, PC Case Fan with PWM Sharing Technology (PST), Pressure-optimised, quiet motor, Computer, Fan Speed: 200-1800 rpm (0 rpm <5%) - Black
- Brand: Unbranded
Description
There are a few changes in the design department of these fans compared to the regular P12 PWM fans. ARCTIC has still retained the famous 5-blade design but this time around there is a ring attached to the tips of these blades making it one complete assembly. This ring is named Fan Wheel by ARCTIC and it serves the purpose of taking the hit from resistance force from the surface but ensuring that static pressure is maintained without losing airflow. But how come the rotor is above standard height then? There is very little spacing on the other side, between the rotor and the stator slats. It’s very tight there (which you’ll notice even with minimal deflection, typically when cleaning by wiping the blades), but in practice it doesn’t matter. In addition, all the stator slats except the one that runs the cable have an aerodynamic shape, their tips taper towards the blades. The signal quality of the motherboard/hub should not make a difference in noise, it is determined by the NE-FD1 IC inside the fan. Noctua often has complaints about the PWM signal quality of third party devices and states that it can be misinterpreted at lower speeds. But this is not the case with Noctua fans and it should not affect the noise level anyway, as long as the fan is running stable at the given speed. The misinterpretation of PWM that Noctua mentions is that the fan operation may not correspond to the set PWM duty cycle ( we have discussed this in more detail in this article, where we also discuss the key features of the new Noctua NA-FH1 hub). Die Qualität und Verarbeitung des ARCTIC P12 PWM sind erstklassig. Der Lüfter ist solide gebaut und fühlt sich robust an. Er läuft absolut reibungslos und ohne Vibrationen. Die Montage war kinderleicht und der Lüfter passte perfekt in mein Gehäuse. Zudem ist das mitgelieferte Kabel ausreichend lang, um es problemlos an das Mainboard anzuschließen.
Now coming to the next round of testing, since P12 PWM fans were operated at 43 dB(A), we normalized the P12 MAX fans to operate at 43 dB(A). The ARCTIC P12 MAX fans reached this sound level at roughly 50% PWM duty cycle. When the test was repeated, we found both fans giving the same thermal performance. This shows the thermal headroom that P12 MAX have even when operating at half of their rated speed. We can already conclude that operating at about 850 rpm is very inconvenient. The fan hums significantly (at 380 Hz), and the airflow is quite low in this setting, disproportionate to the high noise level. Upwards or downwards, however, the high noise level subsides, although resonant frequencies do occur quite often, at different speeds, but you won’t encounter a worse scenario than the one we pointed out above. I wish I had learned that a decade ago. I would still have a 3Dfx voodoo 5 55500 if I'd not been gaming in a storm without an actual surge protector!There are a lot of droning or downright rumbling fans out there, but none have been as popularized by this sound profile as the Arctic P12. Probably also because this acoustic deficiency is really pronounced here and has pushed the manufacturer to make design changes in newer models that are aimed at suppressing critical tonal peaks. But even so, the base model P12 PWM PST is a remarkable fan and is unbeatable in its price range.
The rotor itself is taller than average for a 15mm profile fan. Support with nylon filters is nevertheless maintained. The height difference between the frame and the rotor is sufficient at the fan intake, even if you use a filter with an unreinforced mesh. But the worse ones, which collapse significantly, can already collide as with all fans. Now I know, 600 rpm, okay, and as a sign that I appreciate that we have such demanding readers, I promise you that sooner or later we will create another mode, which will be twice quieter than the quietest mode that we have now. In addition, we will select fans that will have the highest airflow in the 31 dBA mode and there will be room for further noise reduction. Some fans cannot be slowed down even to 31 dBA mode and of the remaining ones, half of them have a speed of 600 rpm or lower. The NF-A12x25 PWM here allows setting some of the highest speeds mainly because it is PWM controlled, and now I’m not afraid to use the word extremely quiet running of the motor and bearings. This is also visible in the spectrograph, where in the frequency band of these components the noise is extremely low. Noctua deserves all the respect in the world here for going into such details as smoother/quieter PWM waveforms with a slanted left-hand side of the pulses. Spend money on the things that matter. 1. PSU 2.mobo 3. The highest end CPU you can afford 4. A GPU that will leap frog the next gen(don't upgrade each release!) and last but not least.... Don't fall for the "PCI Express Gen 4" hype. The cable is “ordinary” but solid – flat, with the wires holding together nicely. There are two connectors at the end. One to connect the fan to the motherboard or hub/controllers, and the other to daisy-chain another fan. The cable is 40–45 cm in length.The build quality is very decent for such an inexpensive fan, without significant imperfections, which are sometimes seen due to saving on injection moulds. However, don’t expect any extra extras or accessories – the frame is simple, with no anti-vibration pads in the corners. So I must admit that I missed that there are also different revisions of the P12 PWM PST. In this case, ours, tested, will be the rev. 1. – 0.08 A and without the revision specified next to the EAN code. That’s how Artcic usually does it when it’s the first revision…
These fans feature 0dB mode as these would stop spinning at or below 5% PWM cycle. Please note that you would need a supporting motherboard and would also need to enable the Auto Stop or what settings your motherboard’s UEFI BIOS provides. This would come in handy when the system is idling or at no load. However, these fans don’t have ARCTIC PST technology. Simply put you can’t daisy-chain these fans. This is what PST is all about – a fancy name. These fans are powered by a 4-pin PWM connector cable. These cables are flat in design. And one addendum for the discerning reader who will scroll through the comments here and there and might ask the same question as one of the readers of this article in another language. Namely, why the BioniX P120, being more expensive, often achieves a lower airflow than the P12. We discussed a bit in the opening chapter that these fans don’t have the same rotors, but I didn’t want to pay any extra attention to that in the conclusion (these aren’t fans that are in any way competing or that you’ll be deciding between).Auch in Bezug auf das Design überzeugt der ARCTIC P12 PWM. Sein schlankes Aussehen und die schwarze Farbe fügen sich nahtlos in jedes Gehäuse ein und verleihen ihm einen modernen Look. Die neun Lüfterblätter sind optimal gestaltet, um einen effizienten Luftstrom zu erzeugen.
- Fruugo ID: 258392218-563234582
- EAN: 764486781913
-
Sold by: Fruugo