The purpose of an ultrasonic booster is to fine-tune the mechanical frequency obtained by the transducer. It also acts as a stationary intermediatory where the cutting tool can be clamped. Boosters are generally a one-piece part made of Titanium metal. Cutting Tool An ultrasonic cutter can automatically cut through the food items at a very high speed, which you can set through your material handling equipment. Safety The ultrasonic frequency of vibration of the blade leads to reducing friction to a bare minimum. This creates smooth and even cuts on a wide variety of surfaces.

The working of the ultrasonic vibration cutters takes place by utilizing multiple parts in tandem. Here is a breakdown of different parts of an ultrasonic cutter: Ultrasonic Generators High quality and professional cutting ability, provides a neat and clean finish at 22,000 cycles per second. The main housing and attachment may be neatly stored in an aluminum case which also provides a handy foot switch allowing the operator to turn the unit on or off as needed. The short answer is: probably not. The Sonic Saber isn’t a necessity by any means. Your trusty side cutters can perform the support removal and get results that are almost as good in most cases. Even with the Sonic Saber available to me, I still found myself reaching for the side cutters rather than plugging in the Sonic Saber. The main draw of the Sonic Saber, for 3D printing enthusiasts , is support removal. It especially excels at removing resin supports, which is why it makes sense that Phrozen is selling such a product. It cuts through 3D-printed resin like butter, which means you can also use it to modify parts after printing if need be.Cutting soft products like cheese or soft bread with a knife often leads to the complete shattering of the product, making it unusable. In case of an ultrasonic cutter, the cutting motion is so swift that it eliminates any chances of shattering the food item. High Speed Please use sanitizing alcohol to clean the exterior of the device. Do not use any oily or corrosive liquids to clean the device.

The Sonic Saber has a fine blade that zips right through resin. It yields nice, clean cuts that don’t damage the surrounding material. Because it doesn’t really on heat and doesn’t require any physical force, the blade can cut through resin without risking damage to any of the delicate features attached to supports. How well does it work? Conventional food cutting processes often lead to smearing of food items due to high friction. Ultrasonic vibration cutting of food products removes this hindrance. Additionally, ultrasonic cutting provides the option to create very thin slices of food. How Does Ultrasonic Cutting Work? Refine Models with High Accuracy With Sonic Saber's accuracy, trimming joints, touching up errors, and refining models is as easy as it gets. Remove Support Effortlessly Sonic Saber cuts through the supports fast and smoothly without leaving any marks.One thing to point out. The knife blade pictured is misleading. It's much smaller than an X-Acto blade. For working on modeling and 3-D prints, it is perfect. But I also intended to use it for horizontally cutting cork for a train layout, and the blade is too short for that. So for that I will need to do a couple of passes. But I will say this: there were times when I should have grabbed the Sonic Saber. For my review of the Phrozen Sonic Mighty 8K, I printed some very delicate models. In a couple of instances, I broke those with my side cutters while trying to remove supports. If I had used the Sonic Saber, that wouldn’t have happened. Household Appliances, Garden Supplies, Decoration, Commodity, Auto Part, Electronic, Stationery, Toy