NZXT has a separate chipset driver to help resolve Kraken not showing up on a wide range of devices, including X31, X41, X42, X52, X53, X61, X62, X63, X72, and X73. What you need to do is: If the NZXT device still does not detect while connected to the motherboard then there may be an issue with the USB cable. If the device has a detachable USB cable, such as with the Kraken X2, X3, and Z series coolers then you can use a standard Mini USB or Micro USB cable (see the list below) to connect the device to an open USB Type-A port on the motherboard or with an external PC such as a laptop. If Kraken still doesn’t recognize CAM after the switch, then you probably have a defective USB cable and will need to replace it immediately. – Stop Windows Processes With the CAM software, NZXT even gives the user the ability to customize the pump and fan performance itself. So if you want to balance the balance between cooling and loudness, or between pump and fan speeds, instead of trusting in the out-of-the-box settings, the KRAKEN X62 has the opportunity to do so. In addition, current water and core temperature are also given here, and it is even possible to switch between different profiles. The reason why this happens is because of the default OSD settings. It’s not enabled to allow you to view your FPS count on NZXT CAM. You can easily fix the FPS issue by changing your OSD settings.

Bracket | Gaming PCs | NZXT AM4 Bracket | Gaming PCs | NZXT

The nature of a review cycle (while a product is relevant) typically dictates that there’s no means to realistically test for endurance or age. We can revisit in the future if needed, but that’s the only question mark left after the review process: Arctic’s pump design is new, something we’ll look at in our tear-down video coming up shortly, and a new design means we have no reference point for endurance and reliability. In general, liquid coolers outlive the usable life of the system, and potentially two systems, but those that fail do so in a much more visible or catastrophic fashion. Failures are overall rare, however, and that’s always important to note. We’ll send you to our Air vs. Liquid cooler content for more of an explanation on this front. RGB and Fan Controllers (including those integrated with NZXT motherboards), USB connected Kraken coolers (X and Z series, M22), and other devices will be listed under the “Unspecified” section. They can cause your CAM software to freeze or start displaying instability issues. If you have a third-party antivirus or anti-malware, you may want to try disabling it and restarting your CAM software. – Uninstall and Reinstall CAM Working Version If the device does not detect using an alternative cable or if the device does not have a removable USB cable (i.e. RGB & Fan Controller, Kraken X61, etc.), then this may indicate that the device itself may be defective and need to be replaced. Kraken X Chipset DriversThis warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary. We’ve talked about the causes and solutions to CAM not recognizing Kraken. Here are some important tips to keep in mind as you try to resolve the issue: However, if it has been working fine and CAM is suddenly not detecting Kraken, you may have a bad driver or a faulty peripheral, such as bad USB cables and ports. Also, you may experience this issue if CAM doesn’t have control of the necessary components. Other Related NZXT CAM Software Issues Designed specifically for use with processors, the NZXT Kraken X62 offers efficient cooling performance. With its varying fan speeds, it is able to adjust to the specific cooling needs of the system while ensuring optimal temperature management. Please note that our warranty is not an unconditional guarantee. If the product, in NZXT's opinion, malfunctions within the warranty period, NZXT will at its discretion repair or replace the product that is equal or greater in value depending on supply. The warranty does not cover any NZXT product that was damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.

My NZXT Device is not Recognized in CAM

Also before, I had it plugged into my PSU via a molex-sata power cable. It worked fine like that, before. I could hook it up to another system, my old msi mATX board, to see if the RGB lights on the Kraken would work. Try switching your USB cable to a different internal USB header. Moreover, make sure your PC is fully powered down when changing to an internal USB header. Doing so will let you know whether or not the internal USB header you’re switching to works properly. The next test will be for the VRM fan. For this, we’re going to start with an overlay demonstrating the linear feet per minute flow, often called FPM or LPM, as measured with a hotwire anemometer at the edge of the chassis for the cooler. The measurement is taken at an angle toward the VRM heatsink. We measured at a few points and under a few conditions. If you’re unable to get it to work at all, it’s probable that your PC doesn’t support the software. There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I.NZXT Devices using Micro USB: Kraken X3 series, Kraken Z3 series, Hue+ Controller, Hue 2, Hue 2 Ambient, Grid V2, and Grid V3. Our next chart continues with the 3950X 200W load, but allows all the coolers to run at 100% fan speed during the test. This doesn’t move the needle much for Arctic, which seems to top-out in its efficiency at around 1200RPM rather than its maximum 1600RPM. The results were +/-1C as usual, but our average ended up at 50.9 degrees over ambient. That’s not enough of a change, so there’s room to reduce noise level without much loss of overall performance. At the 1610RPM speed, the Arctic cooler ran at 42.5dBA at the normal 20” distance. This puts it about equal in thermal performance to the NZXT Kraken X62 and X72, which run around 51-53dBA, or a perceived noise increase to the human ear of about 2x. Again, that’s perceived to the human ear, not acoustic power, which is a different scale. Either way, Arctic’s solution is significantly quieter at the same performance. The EVGA CLC 360 shows that we’re not limited by our test bench, but also that jet engine levels of noise are needed to drive the temperature down further. 3800X – 35dBA The NZXT Kraken X62 is suitable for installation on a wide range of computer models and can effectively cool the processor, preventing overheating and promoting stable performance. It provides a practical and efficient cooling solution for users seeking reliable temperature management for their systems. The USB connection between your motherboard and your CAM-powered device might be the reason why you’re experiencing NZXT CAM software not working.

Kraken X63 | Infinity Screen CPU Cooler | Gaming PCs | NZXT Kraken X63 | Infinity Screen CPU Cooler | Gaming PCs | NZXT

NZXT uses two of its modern Aer-P fans in a 140-millimeter format to cool the radiator. Thanks to the angled air inlet and outlet openings as well as the so-called "winglet" fan blades, the air resistance is minimized and the fan output and the static pressure are amplified. This results in the PWM fans delivering an excellent cooling performance of up to 166.79 m³ / h. Due to the fluid dynamics bearings made of copper, Aer-P fans have an extended service life of more than six years. They also ensure uniform lubrication, which significantly reduces the noise level during operation. In the Control Panel, select “View devices and printers” or if you are in Icon view, “Devices and Printers”. Mice, Keyboards, Capture Devices, and Audio Devices will be listed under the top “Devices” section.RX 590, 580, 570, 480, 470, R9 390X**, 390*, 380X**, 380, 290X**, 290**, 285*, 280X**, 280**, 270X, 270, R7 370, HD7970**, 7950**, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830 Furthermore, if your .NET framework is outdated or missing, there’s a good chance the CAM program won’t open. Windows apps like Synapse can prevent CAM from launching. The inability to launch NZXT CAM can also happen if you don’t have the right Windows version installed. However, the most common reason for this problem is software-related.