Pipestation Squeeze Off Tool 0-32mm | Plumbing Tools for Isolating Mains MDPE Plastic Pipe or Rubber Pipe | Plumbers Hand Tools for Water Isolation | Clamping Tool Stops Water Flow | Black

£9.9
FREE Shipping

Pipestation Squeeze Off Tool 0-32mm | Plumbing Tools for Isolating Mains MDPE Plastic Pipe or Rubber Pipe | Plumbers Hand Tools for Water Isolation | Clamping Tool Stops Water Flow | Black

Pipestation Squeeze Off Tool 0-32mm | Plumbing Tools for Isolating Mains MDPE Plastic Pipe or Rubber Pipe | Plumbers Hand Tools for Water Isolation | Clamping Tool Stops Water Flow | Black

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. If this is the case, multiple charges will be combined at the basket. A release rate of 1/2 inch per minute or less should be maintained to prevent damage to pipe as recommended by ASTM F1041. Whilst we will make every effort to deliver your goods within the stated/requested time frame, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules, so we would recommend not to start/schedule any work until the goods arrive. Due to logistics of various couriers and suppliers we are unable to give times of deliveries. Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc. Use this squeeze off tool on your next plumbing task to to temporarily prevent water from passing through a plastic or rubber pipe. You also won't need to turn off the water supply, making it convenient to use if you're installing sinks or appliances.

This tool is especially handy when you want to work on repairs without draining the system, which will save you precious time. Acu-Tech offers a range of Squeeze-off tools in both manual & hydraulic configurations, from 20 mm to 355 mm. Squeeze tools are used to stop the flow of fluid or gas in a pipeline, so that repairs can be done, without having to permanently modify the pipeline. These MDPE pipe squeeze off tools are designed to manually clamp MDPE pipe, restricting the flow of water temporarily. Pipe squeeze off clamps allow for repairs to be made, fittings to be replaced and for any other maintenance required on the water pipeline. Featuring a compact design, the squeeze-off is affected by simply turning the handle. This results in the limit plates to clamp/squeeze-off the pipe whilst preventing any damage.

What is a water shut off tool?

Inspect squeezed section for damage before covering. Procedures should be followed that will prevent the same area to be squeezed-off more than once.

Available in two sizes, 16mm – 32mm and 32mm – 63mm, this is a must-have tool for all your MDPE maintenance and repairs. If you need to cut your pipe, you will need a pair of pipe cutters. Step 9: ✅ Turn the feed screw to compress the pipe at a slow rate with momentary pauses to allow stress relaxation in the pipe to occur. This is particularly important when pipe is stiff in cold weather. and potential hazard of static electricity and observe safety precautions. Precautions can be taken to dissipate the charge, and minimize the possibility of an ignition. This will maximize the personal safety of the crew. These precautions should be followed as a minimum, conditions may require additional measures.REED Squeeze-Off Tools for all US nominal pipe sizes follow these standards: ASTM F1734, ASTM F1041, ASTM F1563. For all the metric pipe sizes, they follow ISO 4437 standards. To provide dissipation for static charge, wet down surfaces with conductive fluids and/or apply conductive films or fabrics to the pipe. Keep precautions in place until procedures are complete. Step 7: ✅ Center the squeeze-off tool on and square to pipe. This will allow pipe to flatten without jamming pipe against tie rods.

Pressure control situations requiring squeeze-off may involve working in the vicinity of escaping gas. Consider the possibility Clamps up to 32mm plastic pipe for repairs without draining the system or turning off the water supply. A water shutoff tool allows you to squeeze down copper or plastic pipe to stop the flow of water or other liquids in a pipe to conduct a service. Squeeze off tools come in a variety of sizes from 1/2"- 8" and are manually or hydraulic driven. Whether you are shutting off city water or access to a main water valve, a poly squeeze off tool is the best option. All Reed Mfg, tools use positive stops to prevent damage caused by over clamping. How To Use a Pipe Shut Off Tool

Product Specification



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop