As I wrote above, you can make an Ethernet crossover cable by making the other end as a T568A, as per the image below. RJ45 Pinout Diagram for T568 A

There are so-called cables with A plugs on both ends, which may be valid if the "cable" includes, for example, a USB host-to-host transfer device with two ports. [3] This is, by definition, a device with two logical B ports, each with a captive cable, not a cable with two A ends. Panel mount RCA connectors - includes additional fixing points allowing it to be installed on an instrument panel or equipment panel, as well as in an enclosure Functional T emperature - the capabilities of the thermocouple connector body material and the thermocouple alloy pins is a Critical selection point to consider in your temperature measurement application. as well as a Midi Thru port coming from the Atari. For that matter you need to connect two cables on a male As we’ve come to expect, patch cable color standards may be published by ANSI/TIA but within these recommendations, there has yet to be universal adoption. With patch cable color standards, the University of Wisconsin Network Services Department is leading the way through example by helping to define what colors are to be used for every cable system on their campus.The printer interface is used by several solutions to provide a fast communication channel between two computers These colour codes are offered as guidance in allocating circuits and investigating existing installations. The pins within K, J, T, E and N thermocouple connector are m ade from and Match the Thermocouple Sensor Alloys. First and foremost when it comes to cable color standards, one must realize that while there are institutions like the IEEE helping to provide some standardization, there isn’t yet a universally-accepted standard or even requirement in most industries. The color scheme used in one industry can be totally different from what’s used in another and can vary significantly depending on exactly when the system was put in place.

Pin design (1 pin is copper ground) is selected at times to help reduce electrical signal interference in thermocouples that a shield is connected on the Midi Out connector which is not following the midi standard. It is therefore recommanded to use cable without shield connection. For the Midi Dr. John Emmett discusses the characteristics a cable needs for use in high-performance digital video applications.

The connectors the USB committee specifies support a number of USB's underlying goals, and reflect lessons learned from the many connectors the computer industry has used. The connector mounted on the host or device is called the receptacle, and the connector attached to the cable is called the plug. [1] The official USB specification documents also periodically define the term male to represent the plug, and female to represent the receptacle, though these uses are inconsistent with established definitions of connector gender. [2] If you have a shape and you don’t know how you want it to be glued to other shapes, you want an inward & outward connection point. Thermocouple Connectorsensure the Temperature measurement signal (millivolts) from the thermocouple sensor or lead wire is accurately transmitted to the display or control Instrumentation.