Waveshare Ethernet Module, High-Performance 10/100 Ethernet Physical Layer Transceiver (PHY)

Product Information

When STM become officially supports external PHY Ethernet, I will delete this repository. Hardware requirements

EDIT: After reading that the lenght of wires can be an issue at 50MHz, I wired it with 10cm wires (instead of 20cm on the photo), still the same. Raspberry Pi Pico has a lot of interesting and unique features, but it doesn’t have networking. Of course this was only ever going to be a temporary inconvenience, and sure enough, over Pi Day weekend we saw both USB Ethernet and Ethernet PHY support released for Pico and RP2040. Raspberry Pi Pico and RMII Ethernet PHY emac: Timed out waiting for PHY register 0x2 to have value 0x0007 (mask 0xffff). Current value 0xffff emac: Timed out waiting for PHY register 0x3 to have value 0xc0f0 (mask 0xfff0). Current value 0xffff EMAC_TXD0, EMAC_TXD1, EMAC_TX_EN, EMAC_RXD0, EMAC_RXD1, EMAC_RX_DV and EMAC_TX_CLK are fixed and can't be rerouted to other GPIOs.

TheLAN8720A/LAN8720Ai connect via an RMII interface.These devices support HP Auto-MDIX†, employ Microchip's proprietary flexPWR ® technology andare available in both extended commercial (0°C to 85°C) and industrial (-40°C to 85°C) temperature range options.

it would be great to connect for example some relay for domotic usage and having it cable by lan instead of wifi only Remove the two jumpers from CN2, and place them at the two outermost empty jumper pins marked CN11 and CN12. Microchip's LAN8710A/LAN8710Aiarehigh-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8710A/LAN8710Aiarethe industry's smallest footprint solution with up to 40% lower power consumption than existing Microchip transceivers. The LAN8710A/LAN8710Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.

Parametrics

Add commands ``ZbNameKey``, ``ZbDeviceTopic``, ``ZbNoPrefix``, ``ZbEndpointSuffix``, ``ZbNoAutoBind``, ``ZbNameTopic`` as synonyms for ``SetOption83, 89, 100, 101, 110 and 112`` respectively Power and mode must be individually controllable. Some devices may not function properly if the mode is also turned off when the power is turned off. Zibee add ``SetOption120 1`` or ``ZbEndpointTopic`` to add the endpoint as suffix in topic when using ``SetOption89 1`` Add commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend``, ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105 and 106`` respectively BLE_ESP32 (xdrv_79): Start scan as soon as we are connected to a device - saves missing a few adverts.

ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR짰 Technology in a Small Footprint Example configuration entry ethernet : type : LAN8720 mdc_pin : GPIO23 mdio_pin : GPIO18 clk_mode : GPIO0_IN phy_addr : 0 # Optional manual IP manual_ip : static_ip : 10.0.0.42 gateway : 10.0.0.1 subnet : 255.255.255.0 Configuration variables: ¶ In the future, Ethernet support using external PHYs will change significantly and support may change.I have copy and pasted template {"NAME":"WT32-ETH01","GPIO":[1,1,1,1,1,1,0,0,1,0,1,1,3840,576,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,1],"FLAG":0,"BASE":1} I made a small prototype for the eBox ESP32-T and the Waveshare LAN8720 ETH Board which already has an 50MHz oscillator. BUT when I turn wifi off (wifi 0 in console or changing wifi configuration to non existing wifi), I also loose Ethernet connection. Unfortunately the most common (and cheapest) breakout for the LAN8720 isn’t breadboard-friendly, although you can find some boards that are, so you’ll probably need to grab a bunch of male-to-female jumper wires along with your breadboard. LAN8720 breakout wired to a Raspberry Pi Pico on a breadboard (with reset button)