Method ensure that their products are safe for people and the environment by having their ingredients tested by a leading research firm. Take a repurposed plastic spray bottle and make sure it’s clean. Fill it with one part water and one part white distilled vinegar and shake to mix. Spray the stainless steel cleaner generously onto the appliance or surface and wipe it with a clean microfiber cloth. Repeat as necessary to remove any remaining grime. when a product has a pH of zero, it means that this product is an acid detergent. if the value is 14, it means that the product is alkaline. a pH value of 7 is neutral. everything below that is regarded as acidic and everything above that as alkaline. each step in the pH value makes the product 10 times stronger. so pH 6 is already ten times more acidic than pH 7, but pH 4 is already 1000 times more acidic than pH 7! A specialist steel cleaning paste and sponge duo that delicately cleans and protects your stainless steel surfaces.

Before commencing any task ensure that you have received the appropriate health and safety literature from the supplier and fully understand it. If in doubt seek advice. you should not use an acidic product on an acid-sensitive surface, such as natural stone, enamel or marble, aluminium, copper, stone, galvanised surfaces, kitchen work surfaces, linoleum, lacquered, oiled or waxed floors, rubber, textiles or carpets. if you use an acidic product on surfaces that are sensitive to acid, it can cause temporary or even permanent damage to the surface, such as discolouration. pH neutral products can be used on most hard surfaces, provided you follow the correct usage and dosing instructions.These solutions can also be applied with a soft cloth or sponge. Rinse with clean water. Satisfactory on most surfaces. Use the vinegar and water stainless steel cleaner described above to shine your sink, taps and drainer. It works effectively to clean limescale and grime. the purpose of cleaning products is to remove particular types of stains and dirt. you will need different types of cleaning products to clean the different types of dirt. each product has a different purpose, and therefore also a different pH level or ‘acidity values’. this is one of the most important factors to determine the best product for a specific surface.

Thankfully Method´s stainless steel cleaner with it´s gentle cleaning formula gives stainless steel a protective layer and leaves your surfaces polished and streak free. however, we are not happy with the status quo as our refill pouches are not currently recyclable, and we’re working hard to develop a recyclable, low-carbon refill whilst also exploring other recycling solutions. Choosing the right stainless steel cleaner is much simpler than shopping for a new refrigerator or stove for your home. Still, a stainless steel cleaner is important to keep your appliances looking brand new long after you install them. Here are a few things to consider:Leave to simmer for around 10min, and the burnt bits will simply lift away, leaving your pan as good as new. using our handsoap refills uses 80% less plastic than buying 3 of our gel hand washes new, and refilling one time is half as carbon-intensive as purchasing 3 new hand soap bottles. We also evaluate other performance parameters like polishing ability. If the cleaner claims to leave a protective coating on the appliance surfaces, we test how well it resists new fingerprints and grease buildup. The polishing abilities of each stainless steel cleaner are measured using a device called a gloss meter that measures the amount of projected light reflected off of a freshly polished stainless steel surface. We take careful note of any cleaners that remove the shine and darken stainless steel surfaces after use. Combine one and a half cups of water and plain white vinegar in a spray bottle. Add ten drops of your regular washing up liquid and 24 drops of lemon essential oil and shake well before using. The anti-static formula rejects dust and other debris, so the surface will stay cleaner for longer.