It's hard to beat the Topeak Feza, in either the 10g road or 12g gravel version. Despite being crazy light, and looking rather flimsy, I've found the G12 model to be dependable, and grip more tightly than far cheaper models. There are lighter ones on the market, just, but you're going to be shopping with boutique brands and spending big dollar to save around four grams. Do bottle cages fit all bottles? Now they are standard BHC screws that can be found everywhere but I would have loved that the ones provided were of better quality. If you aren’t up for clamping, strapping, or taping mounts to your frame, there are two ways to permanently add bottle bosses to your frame or fork. Hire a Framebuilder

In the same way, all of us, as consumers, make trade-offs every single day in the products we buy and the services we use – and it seems clear that for many people, in the months and years to come, the actual financial cost will become an increasingly important part of the equation. The holder in itself is very light, gorgeous, and the finish looks durable (to be confirmed along the kilometers of course).

Overall, this is a very lovely cage, and the Cerakote protection does appear to work. Obviously it's an insane amount of money, and I'm not even going to try to justify the price, other than to say you'll probably never have to buy another bottle cage again (unless you want to get a second). The only possible negative I can draw, other than the price, is that the coating does diminish the visual appeal of raw titanium somewhat. Verdict

My only gripe is that the holder is sold with screws with a short head to allow good clearance of the bottle. The fancy screws from my frame stamped with the brand do rub against the bottles when I try to use them so I have to use the Supacaz screws... and they are incredibly soft. You can round the head without using any leverage if you are not careful. Well, first of all the Sicuro cage is made from high-quality 3Al/2.5V titanium, and is hand-bent and laser welded in the USA. It's pretty light (33g on the road.cc scales, just over the claimed weight of 30g) and being titanium it's also pretty tough. Considering that many new bikes are missing a pair of bottle bosses under the downtube, and there’s no such thing as a suspension fork bottle mount, the USB is a good option. It comes in four sizes: 1 1/8-inch for handlebars and seat stays, 1 3/8-inch for steel frames and forks, 1 5/8-inch for 32mm suspension forks, and 2-inch for aluminum tube bikes and 36mm suspension forks. Note that because the cage attaches via a post mount, the nut goes onto the cage and some bottle cages might not work if they don’t have a recessed channel.While it’s possible to have a carbon expert drill and glue bottle mounts in a carbon frame, and there’s likely a way to weld in bosses on an aluminum frame, both of those scenarios get pretty complicated. We won’t even get into it. However, if you have a steel frame, it’s pretty straightforward. We had bosses added to the underside of two v1 Surly Trolls’ downtubes (before they became a standard feature). It works like a charm and doesn’t cost too much. However, framebuilders are a busy lot, so you might have to wait. In addition, when deciding where the bosses are going to go, consider tire clearance when your suspension fork is compressed, if you run one. And, realize that brazing will damage the finish on your bike, which might require a repaint, or at least a partial respray. Rivnut Bottle Bosses Now I've given one star to products in the past, and said re value 'Given it utterly fails to achieve its purpose, it must be of minimal value'. I'd argue the Silca cage has fabulous value compared to that light.

Now, as we’ve said previously, price is only one of the things that is taken into account when our reviewers come up with a judgment on whether or not something provides good value – and if you read the review above you’ll see that in reaching the final score a trade-off has been made between what are seen as the product’s plus points, and the cost. And while the potential market for such as product at that price point is very small, it does exist – and as has also been pointed out in the comments, the opinion of people who would be prepared to fork out that much for a bottle cage is equally valid – it’s their money and their choice. The Monkii Clip has two round cleats that fit their Monkii cage, Monkii frame bag, or Monkii wedge tool bag. It secures via a hinged clamp to any 25mm-38mm tube, such as frame tube, down tube, handlebar stem or fork leg. It has a maximum Load: 1.5 kg / 3.3 lb. Kit includes one adapter, one M5 25mm screw, one M5 50mm screw, and a rubber shim.Each Barnacle uses an M5 bolt and swivel nut to secure it to the tubing and a brass M5 threaded boss embedded into it. Although they can handle more, Jon suggests loading the Barnacles up with no more than 1,000 grams will have negative effects on the bike’s handling (when mounting to the fork), and should be avoided. Find more at our press release here. While they’re not cheap, Tailfin has created a product with a high level of design, engineering, durability, and finish, and until you actually handle them and fit the SFMs, it’s hard to convey how well made they actually are. We think the SFM is perhaps one of the better and more elegantly designed options we’ve tried for use with a suspension fork. Logan and Virginia recently put nearly 2,000 miles on four pairs in Baja and Oaxaca, with no issues to speak of. On our scales, the Fly Anodised cage weighed in at 21g, just 2g over the manufacturer’s stated weight, much lighter than similar cages on the market.