High performance, fast setting, mould-resistant and water-repellent grout from the world’s largest manufacturer of adhesives, grouts, sealants and specialty products for the building industry. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i.

If the goods are not in a re-saleable condition when they arrive back with us, Al- Murad reserve the right to amend the amount of the refund based on the value of re-saleable goods. If an acid-based cleaner is used to clean the joint, we recommend testing the product befoehand to check the resistance of the colour.Mapei Ultracolor Plus does not contain Portland cement and must not be mixed with gypsum or other hydraulic binders; never add water to the mix once it has started to set. Grouting of surfaces where a high protection against the formation and proliferation of micro-organisms is required. DropEffect technology reduces surface absorption to help repel water, dirt, and grime from penetrating grout joints. Mapei Ultracolor Plus Grout is a quick-setting and drying tile grout with water-repellent and mould resistant features.

Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh. If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. Added DropEffect Technology has also been used to create a water repellent grout which is easy to maintain, even in areas with resting water such as bathrooms. Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM or Mapeflex PU45) for flexible expansion joints or for joints subject to movement.Use Kerapoxy IEG to grout ceramic and where floor finishes will be subject to attack by oleic acids (ham curers, sausage factories, oil mills, etc. When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout.

Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.BioBlock® technology consists in special organic molecules which, by distributing themselves evenly in the micro-structure of the joints, block the formation of micro-organisms that cause mould damage.