Remember to keep the threads in the center of the cardboard and keep the threads from spreading out. Also, ensure you are not wrapping the thread too tight that the cardboard is bending or too loose that the loops are slipping out. The tension should be even. Make lines starting from one side spaced 1/8 inch, and ending 1/2 inch from the top. Cut out these lines carefully with scissors; you have a leather fringe in your hand. First, decide on the length of the tassel you want. Cut out a piece of cardboard that is 1/2 inch longer than this. Your hands can replace this if you are in a hurry. I think I have seen someone use a fork to make tassels.

Silk tassel plants ( Garrya elliptica) are dense, erect, evergreen shrubs with long, leathery leaves that are green on top and woolly white underneath. The shrubs typically bloom in January and February, followed by grape-like clusters of round berries that provide much welcome sustenance for birds. Read on to learn about growing silk tassel shrubs. About Silk Tassel Shrubs The long length of the tassels can be tied again for layers of tassels. The first tassel is parted in half. One part is tied together with a part of a nearby tassel. You part the tassel threads into sections and tie them to each other. Use beads strung onto the tassel threads for a beautiful and ornate look to your sari. Cut out one rectangle of size 10 inches by 4 inches for a bigger tassel or 4 inches by 2 inches for a medium one and one rectangle of 2 inches by 1/4 inch. Wrap the fringe around this knot tightly. The fringe should cover the knot at least once all around. I am using simple fabric frayed at the edges to make the fringes.

Site Customisation

Tie at the head, catching the cord and the thread, some 1/2 inch from the top. Tie the floss and the cord together 1/2 inch from the top You need to cut out two pieces of the material to make this tassel. One for the loop and the other for the fringes. And a piece to wrap around the top for a neat look. In a garden, find it a sheltered spot. For the most dramatic tassels, plant the cultivar ‘James Roof’. Get your tassel really fluffy by running a comb over the thread. This will separate the floss and really fluff it out.

Fluff up your tassel threads with a hair comb. Fluff the thread of the tassel with a comb Another simple embroidery thread tassel

Silk tassel bush is a name that pretty much says it all. Evergreen shrub Garrya elliptica is puts its Edwardian elegance on display in winter, when creamy white catkins that look like 14-inch tassels drip like icicles from its branches. If you are not using cardboard, make a bundle of threads that are about 18” long. It’s easier to start longer and trim than to use pieces that are short and hard to handle.) Sari tassels are used in the hems of the pallus of saris. They add to the beauty of the sari. Some silk saris will have thread hanging down to make these tassels, and you just need to tie them. You do not have to add extra tassels here. These tassel threads are made of warp threads of the sari fabric. Wrap the yarn in the middle tightly and when finished glue the end of the thread to secure it. Wind cord in the middle of the embroidery floss

Take a bunch of thread (one whole embroidery floss would do) and keep it around your cord, as in the picture below. Tassels are a bunch of fibers grouped and tied at the top, making them look like a flower. It is used at the end of a cord to hide the ends and as a decorative element in accessories, home decor, and at the time, even clothes. Easy tassels with thread

See also

Bring the whole thread to the front, flipping it. Tie another thread to catch the whole thread some 1/2 inch down. Attach the ends of the smaller rectangle together to make the loop. Use binder clips to keep them together till the glue dries off. You can make a head for the tassel ( used to cover the head of the tassel) using beads, or even polymer clay. But sometimes, you may need to add extra sari tassels. You can make them with simple hand embroidery threads or machine embroidery threads.