The Aico Ei3024 Multi Sensor Fire Alarm is built on the same high quality, reliable and proven technology that all Aico Alarms are renowned for, but contains the latest high-tech enhancements making it the most effective domestic fire alarm on the market. This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. The Ei3024 contains AudioLINK technology, which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The memory feature allows an alarm that has previously activated to be easily identified (through the red flashing LED). The Ei3024 self tests its sensors, battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and/or audible beeps.

All Aico alarms have a date-code label on the side of them which tells you exactly when the alarm was made and also the recommended replacement date. If you’re not sure about quantities, sizes or have any other questions about your electrical wholesale products, our Electrical2Go sales team will be more than happy to help. Give them a call now on 01424 220384. KEY FEATURES The Ei3024 can operate as a standalone Alarm or can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected. Aico Ei3024 3000 Series White 230V Mains Multi-Sensor Optical and Heat Alarm with Rechargeable Battery A large Test / Silence button is fitted to the alarm enabling frequent testing. The silence function allows the alarm / system to be silenced in the case of a false alarm and low battery / fault noises.

Intelligent integrated software enables the device to detect all fire types (TF1 to TF6 & TF8) which surpasses conventional single sensor alarms. The risk of false alarms is also greatly reduced with its smoke chamber design, integrated insect screen and automatic dust compensation.

If the alarms are sounding, there may be a fire present. You should evacuate the property and be absolutely sure there is no fire before returning. If in doubt, always assume there is a real fire present and take the necessary action. Smoke alarms have different sensors to detect different fire types. With The Aico Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types. Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling).Performing a regular test is a vital part of ensuring continued fire and carbon monoxide detection. Alarms should be tested monthly to ensure everything is working correctly.

Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident.

Find A Distributor

SmartLINK compatible. Simply plug in an Ei3000MRF module to enable wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. There is likely to be Carbon Monoxide present. Turn off any gas appliances, open windows and doors and leave the property. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button. Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection.

The Ei3024 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED). Smoke alarms have different sensors to detect different fire types. With the Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types. You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year.This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas. The Ei3024 utilises AudioLINK technology allowing the user to extract real time data directly to a smartphone or tablet using the AudioLINK app. The Ei3024 Multi-Sensor Fire Alarm is SmartLINK compatible, Simply plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.