Joint It Simple Jointing Mortar Dark Grey (1 x 20kg) - Large Size

Product Information

Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Joints must be a minimum of 1/8 th” wide and 1” deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Increased lifespan, greater flexibility and many more advantages over traditional sand and cement without mobility qualities.

If the temperature is forecast to drop below 0 degrees within 12 hours of application, we recommend you postpone application until the weather is a bit warmer. Ready to use from the tub, no mixing, no second part to stir in, just open and use, simply brush in. Joint-It's simple paving jointing compound is water permeable, no more long lasting puddles in your patio, this is also in the news recently because of all the construction and hard surface projects that prevent rain from seeping into the ground forcing water into rivers and out to sea and not where we need it. Are you looking for a sweep-in jointing compound or patio grout but not sure of the best product for you? In this blog post we look at both EasyJoint and Joint-IT colours. These are two of the highest selling jointing compounds on the market. In this blog we compare both products so you can see which one is the best product for your needs. What are Jointing Compounds?Traditional polymeric sand or cement methods of jointing are extremely time consuming and laborious. Our simple to use, sweep-in grouting sand means gets the job finished faster and stands the test of time. EASYJoint offers all-year-round use. It can be applied any time in the wet warm or freezing cold. It is up to 20 times faster to use than traditional mortar jointing products and there is no need to bend over or be on your hands and knees to trowel it in. The EASYJoint product is extremely strong and offers long-lasting joints for years to come. When used correctly there will be no staining on patio slabs as the products comes away completely cleanly. When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application. Description Joint-It Simple 12.5KG Available In 4 Colours (select in the drop down menu) – new for this season!

Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles. Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint. Joint-It Simple can be applied in all-weather conditions. However, we don’t recommend you use the product when temperatures are forecast to drop below 0 degrees Celsius within 12 hours of application. Sweeping in the jointing compound means it gets the job done faster and better with a more consistent result and stands the test of time.

No results found.

Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT-IT residue is removed. Always sweep diagonally across joint. Unlike polymeric sand, our paver sand does not cause any hazing on slabs. We know that this is a major problem with polysand, and that is why we designed an excellent solution. Our product also doesn’t create any dust. There is no need to compromise your health by working with toxic chemicals in other jointing sands. Our natural, eco-friendly formula makes working safer for you and kinder on the environment. Our Joint-It Experts Top Tips! Traditional sand and cement methods of pointing are extremely time consuming and laborious. Our simple to use, sweep-in jointing grout means gets the job finished faster and stands the test of time.

Joints must be a minimum of 3mm wide and 25mm deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine.Take care not to brush the product out of joints or into nearby drains. JOINT-IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT-IT will take longer to harden. Once bag is opened, contents must be used within 4 hours.