garden ornaments and accessories Concrete Plinth Black & White

Product Information

Concrete gravel boards are a long term cost effect method of improving the longevity of your fence panels. Easy to install, concrete gravel boards raise your fence panels off the ground, helping to reduce the risk of moisture damage such as rot and decay that would otherwise be caused by damp or wet ground.

Reinforcement bars should be protected by 25mm concrete cover. As far as stirrups are concerned, stirrup diameter should be at least 6mm and a spacing of 15cm should be sufficient.Our concrete gravel boards are available in two different heights. These are 6 inches and 12 inches (1ft). If you would like your fence panel raised higher from the ground, we would recommend the 12 inch (1ft) concrete gravel boards. If you are installing a traditional close board or feather-edge fence we can supply six inch high concrete gravel boards to suit. We offer this variant in two different lengths (2.4m and 3m) dependant on post spacing. This item can be bolted to recessed concrete fence posts by way of a carriage bolt or can be screwed to timber posts. Concrete Gravel Board Installation

It is recommended to provide two bars with minimum diameter of 12mm at the bottom of the beam. Similarly, two bars with minimum diameter of 10mm shall be provided at the top of the plinth beam.All of these options are easy to install and provide a significant level of protection to your fencing project.