Oregon Yukon Class 1 Leather Chainsaw Protective Boot

Product Information

First of all, the full grain leather outer layer is incredibly durable while not restricting movement. This makes them a joy to wear for even long periods of time. The sizes are a little larger than what you would expect. I usually take a size 11 so that’s what I originally tried only to find them a little bit too big. Next I slipped on the 10 and a halves and they were perfect, so I’d suggest going down a step from your shoe size. Safety wise, these boots are top drawer. Being class 3 means that you can use them with chainsaws with spinning speeds of 28 m/s. They have solid steel toe caps, which are a must have in any decent chainsaw safety boots, and also a steel midsole that is penetration resistant. On top of this, they have a ballistic nylon shin guard and a suregrip 360 nitrile outsole. Put your boots upright and each standing on its own to allow air circulation. You should not pile them together. The boot has high-quality Styrene-Butadiene Rubber (SBR) blended with Natural Rubber (NR). These materials are reinforced by cotton canvas lining.

The chainsaw boot should have an outsole that is chemical, oil, and abrasion resilient to improve durability. These chainsaw boots come in at a mid-range price and they have plenty of convincing qualities. We also like the lightweight construction that ensures fatigue-free working and they really are lightweight when you consider the size and level of protection they offer. These boots have been approved by professional loggers and it’s hard to point a finger at any negatives. Featuring a lace-up closure system with good strong laces, users can fasten the laces to their desired fit and feel comfortable wearing the boots all day long. The metal clips that hold the laces are very sturdy too. The footbed is made of soft PU material and is covered with cloth to guarantee maximum comfort and impact absorption. In fact, the insole is removable should you wish to clean it from time to time. Always put on your chainsaw boots whenever you are cutting down trees or pieces of timber since they provide protection from debris and pieces of chips that are flying at high speed. This debris is usually sharp, and in case you are not wearing your safety, footwear can harm your feet.Their height measures approximately 8 inches, and their weight is commonly 6.1 pounds for every pair of the size of 10. They have a rear pull loop.

Cleaning is an essential maintenance activity done on any set of chainsaw boots. Without it, even the most expensive and durable pair of boots will not last for long. Inside these premium chainsaw safety boots is the Sympatex inner membrane making them both abrasion proof, breathable and waterproof, and the footbed is made of moisture absorbing material. Safety is paramount when working with a chainsaw. It starts with your clothing and as you will learn in this buyer’s guide, includes specially designed footwear. A pair of boots can be underestimated for other jobs, but professional tree surgeons know they can’t set off to work without safety boots. Boots can make a difference between just a damaged pair of boots or a minor injury, and a very serious, life-changing injury. But, it isn’t just the protection that should be considered, comfort is very important as well, especially to professionals who wear them all day.

Latest articles

Superior Protection: The steel toe cap (200J) and high chainsaw protection class 3 (28 m/s) ensure your feet are safe from any potential hazards. In this way, your boots will be ready for use the next day. How to store chainsaw boots for long-lasting? TheCofra Power Chainsaw Safety Leather Boots are a robust pair of boots that provide safety and comfort whilst still be lightweight. The combination of safety and comfort is exactly what you need to work in demanding environments for longer periods of time, whether it be climbing trees or cutting logs up at ground level. This boot has high-quality Italian grained leather uppers that are water-resistant as well as having chainsaw cut protection.

Apart from chainsaw hazard protection, the best chainsaw boots on the market offer you great protection against all types of hazards and weather. But you should look for specific types of protection that fit your line of work. If you’re working in a wet environment, filled with puddles, and exposed to pretty high temperatures, the Haix Protector Light Light boots are the best waterproof chainsaw boots you can find. Although they cost more than the other boots reviewed here, all that money goes into the promise of a great quality. Leather chainsaw boots tend to fit me better than rubber ones, and with the laces I can adjust them to suit me, even with steel toe caps which can make the ends tighter. Build quality

Part Finder

Chainsaw boots help prevent several injuries, which without them would cause harm even to professionals like arborists and harvesters and any other person who uses a chainsaw. The Oregon Yukon boots are among the best-rated chainsaw boots you can find. One of the reasons could be they’re affordable, but that’s definitely not the only factor. When you’re analysing their build, you can only notice quality in the materials used, craftsmanship and design.

If you find there is no need for washing them with water, then you can use a shoe polish of good quality. Shoe polish helps to keep your boot shining and improve its breathability. The combination of these materials helps to enhance its durability. The natural rubber protects the boot from chemical damage as it is chemical resistant. With their superior protection, waterproof construction, and reliable grip, these Skellerup Euro Forester Chainsaw Safety Boots are a great choice for anyone in need of durable and dependable footwear for chainsaw work. Professionals like tree surgeons know that if they do not cover the top of their boots, then sawdust may fill up the boots. Oregon designed these boots with lace drawstrings so that you can fasten around the top and prevent any dust from going in. That being said, if you wear them with the chainsaws trousers going over the boots, this would not be a problem anyway, however it does give you the option which is a plus. The appearance of the boots is also striking such that they are bright orange in colour. The boots are also available in a variety of sizes ranging from 5 to 13, so anyone that uses a chainsaw can find their ideal size. Pros

Sign up for special offer emails

Vibram ladder grip outsole: The Vibram ladder grip outsole offers excellent traction and grip, making it easier to climb ladders and navigate slippery surfaces. This feature not only enhances the boots’ durability by preventing slips and falls, but also ensures that you can work safely and efficiently. It is evident that after rounds of tree felling, one needs to clean his chainsaw boots. Avoid immediate cleaning of your boots will gradually damage them. The first thing that makes them so well-rated is their steel toe caps, doubled by rubber toe caps. So they’re not solely protective against impacts, compression, and class 1 cuts; they’re also extremely comfortable and reliable. And their steel midsole comes as a great addition in terms of its resistance to punctures. TheOregon Yukon 295385/46 Chainsaw Protective Rubber Safety Boot will definitely give a safe and comfortable experience when working in wet areas. The boots feature stainless steel toe caps which provide enhanced safety in case a heavy log accidentally falls on the toe end of your boots, which happens more than you might think. The affairs, business and property of the Company are being managed by the Administrators and who act as agents of the Company without personal liability.