STAHLWERK CTM-250 ST Combination Welder TIG + MIG/MAG + MMA/E-Hand + Cut/Plasma with 200 Amp and 50 Amp Plasma Function, Many Welding parameters Adjustable - 7 Years Warranty

Product Information

Plasma / CUT – A plasma jet is generated by means of electricity, which melts the material, which is then removed by compressed air. In this way, all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more can be cut precisely without any effort. Tehnologie IGBT - cea mai recentă și cea mai modernă tehnologie a tranzistorilor permite cea mai înaltă performanță și ciclu de funcționare (ED) de 60% la putere maximă! Fără transformator, fără MOSFET, IGBT de ultimă generație! DC TIG welding - direct current (DC). Welding of almost all metals, such as steel, stainless steel, copper, brass and many more. Note: Not suitable for aluminum - this requires an AC/DC unit. 4 in 1 combination unit - TIG + MIG/MAG + MMA / E-hand welding up to 200 A possible and 50 A plasma function.

The CTM 250 ST shines when working with stainless steel and efficiently cuts through metals that present challenges such as flash rust or paint. Its precision cutting capability ensures clean, accurate results, even in the toughest conditions.

Features & Advantages

Flux-Cored Wire – všetky naše zariadenia série ST môžu používať Flux-Cored Wire. To umožňuje zváranie bez ochranného plynu. Polarita zariadenia môže byť na tento účel obzvlášť jednoducho prevrátená. Profesionálny TIG zvárací horák “WP-26F” / balenie hadice 4,5 metra s flexibilnou hlavou horáka a ochranou proti zalomeniu na plynovej prípojke Vodiace valčeky drôtu 0,6 mm & 0,8 mm / 0,8 mm & 1,0 mm / 1,0 mm a 1,2 mm sú už nainštalované v zariadení Wire reel - Commercially available wire reels from 1 kg to 5 kg can be processed here. The spool mandrel can accommodate 16 mm & 50 mm spools.

Zvitok drôtu – Tu je možné spracovať komerčne dostupné zvitky drôtu od 1 kg do 5 kg. Na tŕň cievky je možné umiestniť cievky 16 mm a 50 mm. STAHLWERK - проектиран да убеждава! Като една от водещите компании на пазара, ЩАЛВЕРК предлага на клиентите си висококачествени продукти от собствено производство от 1998 г. Ключът към устойчиво нарастващ успех се крие в постоянно високо ниво на производство, съчетано с изключително обслужване, което не оставя нищо желано. Прецизно координираните производствени процеси, високото ниво на експертиза от техните служители и професионалната поддръжка на техните клиенти дори след покупката характеризират компанията и до днес. MMA electrode welding / ARC welding - a universal welding process. An arc causes the electrode to melt, forming the weld seam. MIG/MAG – Metal arc welding with direct current (DC). Welding can be done with inactive/inert (MIG, e.g. argon) or with active (MAG, e.g. CO2) gases. Gas and welding wire come out of the torch head, allowing welding to be done with only one hand. TIG/MIG/MAG) – určuje ovládanie režimu a poskytuje pokročilú kontrolu nad priebehom prúdu. V režime 2T zostáva vysokofrekvenčné zapaľovanie (HF) aktívne až do uvoľnenia tlačidla na baterke. V režime 4T sa oblúk zapáli po jednom stlačení a uvoľnení tlačidla. Po opätovnom stlačení a uvoľnení sa zapaľovanie ukončí.kladkový pohon – spoľahlivý a výkonný posuv drôtu. Vďaka 4 hnacím kladkám sú aj hrubšie drôty podávané nepretržite a bezpečne. TIG (Tungsten Inert Gas) – Shielded metal arc welding with inert/inactive gases such as Argon 4.6 (99.996 %). An arc is created between the tungsten electrode and the workpiece in an argon bell. This melts the material and any filler material added. A weld seam is produced.

Gas follow-up (TIG) – protects the tungsten electrode from excessive wear and protects the weld from oxidation. The parameter can be set individually and separately. It specifies how long gas should flow after ignition. Spojovacia hadica so zacvakávacími rýchlospojkami od prístroja k odlučovaču vody, vrátane 6-dielnej pripojovacej sadyFlux-cored wire - all our ST series units can use flux-cored wire. This allows welding without shielding gas. For this purpose, the unit can be reversed particularly easily. Air Run-On – Infinitely adjustable air run-on from 3 to 10 seconds to cool the torch and reduce nozzle and electrode wear. Plasma / CUT - Un curent este utilizat pentru a crea un jet de plasmă care topește materialul, care este apoi suflatcu aer comprimat. În acest fel, toate metalele conductoare precum oțelul standard, oțelul inoxidabil, cuprul, aluminiul, titanul și multe altele pot fi tăiate precis fără niciun efort.