Autotek Professional Spray Paint, Black Bumper & Trim, 500 ml

Product Information

The best way to find the lowest price for painting a car is to compare quotes from several auto body shops. When shopping around, you may find some shops offering discounts or special promotions. So, when making a decision, it is important to take both price and quality into account, especially if you are trying to choose the cheapest option. Q: Is it cheaper to wrap or paint a bumper? Either vertically or horizontally, apply the primer in smooth cross coats 250mm distance from the repair. According to my experience and recommendation, spending extra money will make the paint job last longer and look more professional.

After use, turn the aerosol upside down to empty the nozzle valve to clean, so you can use it again if you need to. Hopefully, you won’t! A lot of times wheel rims can accumulate a lot of rust and dirt causing them not to be as shiny as they once were. However, the Krylon Automotive Wheel Paint can be used to refresh those old and rusted rims and make them look like they're new.This is all of the stuff I needed to complete the repair, along with some basic tools (drill, screwdrivers and spanners): This is the stuff that truly makes your paint pop at the end. It is a 2-part clear coat, which is activated by pressing the provided red cap into the bottom of the can before using. This activates the hardener and is what allows you to get that professional-looking automotive finish. Beyond the different bases, paints also have different levels of stages. The number of stages basically determines if a buyer needs all the layers of the painting process or if those properties are included in the base color. Single-Stage Paints I’m using a 1K primer from Paintscratch here. Shake the rattle can per the instructions on the can to ensure the primer is well-mixed. Spray from about 6-8 inches away from the surface and make sure you apply even and slightly overlapping strokes. You should apply about 2-3 coats of primer depending on how good of coverage you get. You should wait about 10-15 minutes in between coats. Now, protect the bumper’s paint and make it glossy by applying a clear coating. A glossy clear coat will enhance the paint’s durability as well as make the bumper look shiny and stylish.

The drying time of paint is dependent on humidity and temperature, and can take several hours to one day. One of the most important things about painting is keeping your workpiece clean. This means that the car bumper in this case is completely washed and cleaned of dirt, oil, dust, and any other contaminants. Aside from cleaning the outside surface of the bumper, you might want to consider cleaning the inside of the bumper as well. If there is debris on the inside of the bumper, sometimes moving or bumping the bumper can cause the buildup to come off and get into your paintwork. Similar to the primer with these 12.5 oz spray cans, they cover about 4 square feet of area if you’re spraying 2-3 coats of paint. I used about 3-4 cans per bumper cover. I needed slightly more paint than the primer for the same area because I needed to ensure there was enough coverage of the paint more so than the primer. Furthermore, when you get to the last bit of paint in the can, you start experiencing some splatter. So, you may end up having to stop spraying base coat before you get to the very last bit of paint in the cans. As a result, you’re using about 90% of the paint in the spray can, but you avoid paint splatter on your paint surface. 2K Clear CoatPainting a bumper can sometimes be more cost-effective than replacing it, especially if it is still in good condition. Painting a bumper can vary greatly in price depending on several factors, such as the type of paint used, the type of vehicle, and the condition of the bumper. Here are three possibilities. Alcohol-based cleaners are used in addition to grease and wax remover to clean water-based contaminants such as fingerprints, sweat, etc. A popular product in auto body shops is Sprayway Glass Cleaner, which is used for this purpose.

If you get any bugs or debris onto the clear coat while it’s drying, you may be able to use the tape method (mentioned earlier during the base coat application) to remove it very carefully. Since the clear coat is going to be your final layer on your paint, you don’t want to mess around too much with clear coat. If the particle is not going to be terribly noticeable, you may want to just leave it be as sometimes messing with it might cause even more noticeable blemishes like gouges or fingerprints in the clear coat. It takes time to paint a car bumper, especially for beginners. It usually takes several coats of paint to complete the job, with each coat needing to dry before applying the next. Worried about your technique, or do you need some pointers on how to get a premium finish? Don’t worry, we’ve got you covered. Watch our guide on how to spray paint a car and you’ll get a great finish first time. A grease and wax remover is necessary for removing oil-based contaminants. Since you want the best adhesion for your paint, this will remove unwanted greases/waxes that may weaken the bond between the bumper and the primer/paint/clear coat. Shake up the can to mix the clear coat per the instructions on the can. This is the part where your finish starts to look amazing. Before spraying the 2K clear, your painted bumper may look good but it just doesn’t have that pop. Well, after the clear coat is applied (especially after the second and third coats), you’ll see some amazing results.

Since rattle cans only spray when they are upright or mostly upright, you will need to ensure you use something to prop the bumper up. There are bumper stands out there that will do this, but you may be able to find something that you don’t mind getting paint on to prop it up, if you want to save some money. The automotive paint is also very durable and won’t scratch easily like other typical paint jobs. One satisfied customer found that it was “probably the best bumper/plastic paint I’ve ever used” and added that it’s “probably all I'll buy in the future.” After using this product they were also impressed with how the paint retained its finish, “I've been through the car wash several times and no peel or chipping.” Specifications On this guide, I’ll be showing how to prep the bumper cover, apply several coats of primer for the optimal adhesion of the paint, spray on several coats of paint, and finish it off with 2K clear coat. There are a lot of things that are important to know, but I’ll do my best to make sure they are noted throughout this guide.