Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

The Teltonika RUT240 is a compact, industrial, 4G LTE WiFi router for professional IoT applications. It delivers high performance for mission critical cellular communication.

Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction. However, you may want to add a new user at first. This can be done from the Add New User section below: The PPPoE protocol is used to set up a PPP (Point-to-Point Protocol) connection over the Ethernet port. If we compare RUT240 and RUT241, we will see equal measurements and interfaces. It offers three connectivity options (cellular, Wi-Fi, and wired), a digital I/O, and three antenna connectors. However, inside these routers, you will find different CPUs: Qualcomm Atheros Hornet (MIPS 24Kc 400 MHz) in the RUT240 and MediaTek (MIPS 24Kc 580MHz) in RUT241. Besides, the RUT241 comes with a doubled RAM capacity of 128MB and offers even better value than before. This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits.Custom DHCP options are number and value pairs used to configure advanced DHCP functionality. It does not configure DHCP ipv6!. The DHCP options modal is used to 'Add', 'Delete', 'Save' multiple options.

Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini Note: Firmware version RUT2_R_00.07.04.4 released on 2023.06.26 was removed due to an issue on certain modems with failing initial mobile connection after upgrading from RUT2_R_00.07.02.5 or lower. Presumes peer to be dead after given amount of LCP echo failures. Leave it at 0 to ignore failures. The Firewall Settings section is used to specify to which firewall zone if any this interface belongs. Assigning an interface to a zone may provide easier configuration of firewall rules. For example, instead of configuring separate rules for each WAN interface, you can add all WAN interfaces into a single firewall zone and make the rule apply to that zone instead.

Teltonika RUT241 Industrial 4G LTE & 4GX Mobile WiFi Router

Custom APN Network Identifier. Cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*". RF Standards: EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1 Arrange power and Ethernet cables so that they are not likely to be stepped on or have items placed on them. Choose the firewall zone you want to assign to this interface. Select 'Unspecified' to remove the interface from the associated zone or define a new zone and attach the interface to it. ThingWorx: Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL) SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

Teltonika RUT241 4G Router with WiFi

Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4 The Update Firmware section is used to upgrade the device's firmware. Firmware can be upgraded either from server or from an image uploaded from your computer.

Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUT240 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU A Phone Group is a collection of phone numbers that can be used as the recipient in SMS & call related services instead of specifying every number individually. The phone group list is empty by default thus, you must first add at least one new group before you can add phone numbers to it. To create and begin editing a phone group, follow these steps:TELTONIKA NETWORKS Erklærer herved at RUT240 er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU Enabled - the device attempts to connect to RMS every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If it cannot connect for 14 days, it will enter Standby mode. TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem