Salmue Cotton Bed Canopy+Steel Ring+Hooks +Hook Base Plates +Adhesive Tapes+Screws Block Out Light Dome Princess Mosquito Net Equip With Assembly Tools(Khaki)

Product Information

These fix to the wall behind the taps and rest on the bath rims. When sitting in the bath, the rail will be directly in front of the person at about chest height. In this position it will provide stability whilst in the bath. The rail should only have downward pressure applied so the weight is taken by the bath rim, it is not designed for the user to pull on to sit down or stand up from the base of the bath (Pain et al 2003). The Arena adjustable bed grab rail, handle, ring or bed lever (depending on what you call it) has not got a triping hazard like the parnell premier grab rail, it also comes with anti entrapment and was designed by Laybrook especially for domestic electric adjustable beds. The Arena grab ring is attached to the side of the surround so it stays static when you change position on your bed, this makes it easy to use when getting in and out of bed, helps you turn whilst laying in bed, supports you when getting up out of the bed whilst sitting on the edge. With other grab rings, when the head section of your bed elevates to the upright position the grab ring moves with the bed and impedes you from getting in & out of the bed. When using these rails you must consider the integrity and strength of the surface to which you are fixing them. For example, when fixed to wall tiles, the attachment of the tiles to the wall MUST be secure. Most grab rails are permanently fixed in one position onto the wall, floor, ceiling, or a combination. When fitted securely and correctly they should be able to cope with the push/pull forces of repeated use.

Alternatively, if there are no obstructions outside the bath (e.g. the sink or toilet) a vertical grab rail could be installed on the wall at the tap end of the bath. This is useful when stepping in and out of the bath and also to hold onto if standing to shower. The height will depend on your needs, often at the same height as an existing banister rail. This is usually between 900-1000mm above the pitch line of the stairs. Horizontal rails may help when pushing up from sitting and provide support when lowering, e.g. on to a toilet. Most people find it easier to push down on a rail rather than pull on one, so horizontal rails are more commonly used. The rail should be mounted at a height that the user can comfortably reach whilst stood both from outside the bath and from in the bath. These provide a horizontal bar in their lowered position. They should be fitted at waist/elbow level and approximately a fist width away from your thigh when sat on the toilet.A rail can be fixed horizontally to the wall 75-100mm above the bath rim (see dimension c in diagram). It should start 200mm from the tap end of the bath (dimension a) (COT 2006 p13, H M Government 2015, p58, diagram 26). The following is general guidance. When an individual user is known, personal factors such as the height of the person should be given priority.

sitting down or standing up from the toilet, or standing to manage your clothes when using a toilet Bottom half of Arena grab ring is attached to inside of surround and the top half is attached to the mechanism. THIS BED LEVER FITS ALL TYPES OF SLATTED DIVAN ADJUSTABLE BEDS FROM ALL COMPANIES AND 95% OF ALL OTHER LAYBROOK ADJUSTABLE BEDS, ALL LAYBROOK WOODEN ADJUSTABLE BED (NEEDS A DIFFERENT BOTTOM PLATE), ALL LAYBROOK LEATHER ADJUSTABLE BEDS. The horizontal rail can be used in combination with a bath board. The user may benefit from holding the rail while they sit on the board, then turn and lift their legs in and out of the bath

Recently Viewed

If there are obstructions beside the toilet, such as a radiator, or the walls are not suitable for installing rails, you will need to look at alternative kinds of support. Vertical rails may assist when pulling up into a standing position or for just maintaining balance. They are fixed to the wall or to the floor behind the toilet and can fold down to a horizontal position alongside the toilet. The Arena adjustable bed grab rail, handle, ring or bed lever (depending on what you call it) comeswith anti entrapment andwas designed by Laybrook especially for domesticelectric adjustable beds. The Arena grab ring is attached to the side of the surround so it stays static when you change position on your bed, this makes it easy to use when getting in and out of bed, helps you turn whilst laying in bed, supports you when getting up out of the bed whilst sitting on the edge of the bed. Withother grab rings, when the head section of your bed elevates to the upright position the grab ring moves with the bed and impedes you from getting in & out of the bed. An epoxy, paint or plastic finish provides a warmer feel to rails, is hard wearing and will reduce the effects of condensation. A choice of colour allows for a colour contrast with the wall for users with low vision or for co-ordination of bathroom accessories.