RJ-45 自动感应 10/100/1000 PoE+ 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T，IEEE 802.3at PoE+）；介质类型：Auto-MDIX；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工 RJ-45 自动感应 10/100 PoE+ 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型100BASE-TX，IEEE 802.3at PoE+）：介质类型：Auto-MDIX；双工：半双工或全双工

RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only Delivers consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management. Provides optimal configuration automatically when connected to Aruba access points for PoE priority, VLAN configuration, and rogue AP containment. JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A For J9537A, J9549A, J9535A, and J9637A modules: K.15.02.0004 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 Not supported for use in the following 3800 models: J9573A, J9574A, J9575A, and J9576A. The SFP⁠+ ports do not support 100M operation.For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.) It allows real-time traffic classification with support for eight priority levels mapped to either the queues, it uses weighted deficit round robin (WDRR) or strict priority (SP). The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). Table 57: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. RJ-45 10/100/1000ポート(IEEE 802.3 Type 10Base-T、IEEE 802.3u Type 100Base-Tx、IEEE 802.3ab1000Base-T Gigabit Ethernet)またはSFPスロット(SFPトランシーバーに使用)ポートとして使用可能

For use in the SFP ports of the J9263A 6600-24G Switch, the J9264A 6600-24G-4XG Switch, and the J9451A 6600-48G Switch The 25G module (JL687A) requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 RJ-45 10/100/1000 端口（IEEE 802.3 类型 10Base-T；IEEE 802.3u 类型 100Base-Tx；IEEE 802.3ab 1000Base-T 千兆位以太网）或 SFP 插槽（用于 SFP 收发器）IEEE 802.3 Type 10BASE-T、IEEE 802.3u Type 100BASE-TX、IEEE 802.3ab Type 1000BASE-T)、通信方式：10BASE-T/100BASE-TX：半二重または全二重、1000BASE-T：全二重のみ J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A ArubaOS-Switch Software Feature Support Matrix for XX.YY (where XX.YY is the software branch you're interested in) document would shed some light about which features are implemented on which XX.YY Software Branch. Only supported for use in the SFP⁠+ ports on R0X43A module. 100FX is not supported for use in the R0X44A SFP28 or SFP56 ports of any other 6400 module.