QNAP TS-453D-4G 8TB 4 Bay Desktop NAS Solution | Installed with 4 x 2TB Western Digital Red Drives

Product Information

Firmware Recovery Guide for TS-251B, TS-x51D series, TS-x53B Series, TS-x53BU Series, TS-x51A Series, TS-x53U series, TS-x53A Series, TBS-453A, TBS-453DX, HS-453DX, TS-x53D series, TVS-x63 Series, TVS-x63+ Series, TVS-x71 Series, TVS-x71U Series, TVS-x72N Series, TVS-x72X Series, TVS-x72XT Series, TVS-x72XU Series, TVS-x73 Series, TVS-675, TS-x73U Series, TS-x77 Series, TS-x77XU Series, TS-hx77XU Series,TS-1685, TVS-ECx80 / TVS-ECx80+, TVS-ECx80USeries, TVS-x82 Series, TVS-x82T Series, TVS-x82ST Series, TVS-882BR, TVS-882BRT3, TVS-951X, TVS-1282T3, TVS-1582TU, TS-x83XU Series, TS-h1283XU, TDS-16489U, TDS-16489U R2, TES-x85U series, TS-hx88X series, TS-h3088XU,TS-h1886XU-RP R2 NAS Firmware Recovery Guide for TS-251B, TS-x51D series, TS-x53B Series, TS-x53BU Series, TS-x51A Series, TS-x53U series, TS-x53A Series, TBS-453A, TBS-453DX, HS-453DX, TS-x53D series, TVS-x63 Series, TVS-x63+ Series, TVS-x71 Series, TVS-x71U Series, TVS-x72N Series, TVS-x72X Series, TVS-x72XT Series, TVS-x72XU Series, TVS-x73 Series, TVS-675, TS-x73U Series, TS-x77 Series, TS-x77XU Series, TS-hx77XU Series,TS-1685, TVS-ECx80 / TVS-ECx80+, TVS-ECx80USeries, TVS-x82 Series, TVS-x82T Series, TVS-x82ST Series, TVS-882BR, TVS-882BRT3, TVS-951X, TVS-1282T3, TVS-1582TU, TS-x83XU Series, TS-h1283XU, TDS-16489U, TDS-16489U R2, TES-x85U series, TS-hx88X series, TS-h3088XU,TS-h1886XU-RP R2 NAS Applied QNAP NAS models Even if you compare that J6214 CPU in the more affordable TS-453E vs that of the N5105 in the Prosumer/Flagship TS-464, they are extremely comparable and CPU benchmark only gives the N5105 a small advantage of 4116 over 3930. The J6412 even arrived in the market later in the Intel CPU refresh and likely benefits from small energy efficiency improvements too. Overall, the CPU in the TS-453E is an excellent choice for this tier of the QNAP portfolio. When the firmware version is on 1.x.x, it is factory test firmware. No HDD can be detected with this firmware. Need to update the firmware to official firmware first. Although I still prefer the Synology DSM interface overall, that's probably because I'm just more familiar with it. That said, while I was exploring the TS-464 for the review, I began to feel much more comfortable with the UI and how things were laid out, so you can't go wrong with QTS. Conclusion

QTS je operační systém pro základní a střední úroveň QNAP NAS. S Linuxem a ext4 umožňuje QTS spolehlivé úložiště pro každého s univerzálními funkcemi a aplikacemi s přidanou hodnotou, jako jsou snímky, mediální servery Plex a snadný přístup k vašemu osobnímu cloudu. Systém From a memory perspective, the QNAP TS-464 comes standard with 4 GB of DDR4 SODIMM and is expandable to 16GB (2x8GB SODIMMS). Although I've read some people comment that they're unofficially running 32GB of RAM on the NAS, Intel says that the CPU only supports 16GB maximum, so I wouldn't recommend it. The first thing to discuss here is the CPU of the QNAP TS-453E NAS. Now, as this is effectively the follow-up to the TS-451+ (and, frankly, severely hammering down on the TS-451D2 NAS by the way), you will be unsurprised to see that it arrives with an Intel Celeron Processor. However, this system arrives with an Intel J6412 Quad Core Processor. This power/energy efficient CPU lives on the board, under a fanless heatsink.

Velké kapacity I/O s rozšířením PCIe

The QNAP TS-453D is a compact, tower form factor NAS. It is small enough to sit on a desk without being too intrusive. The front of the device has a shiny plastic cover with company branding that covers the drives bays. The cover slides off easily to access the toolless, hot-swap drives underneath. Along the right side is the power button at the top, the indicator LEDs running down the side, a USB 3.0 port and a USB copy button. The one (very minor) complaint I have about QTS is that applications are installed in the middle of the desktop. This means when you're using various tools, the icons are covered up and it's harder to access them, whereas DSM puts the icons on the left side of the screen, out of the way. It's a minor observation, but one that I've often thought should be user configurable. If the startup problem persists, please return the NAS to your local dealer or distributor for system repair immediately. The device has a plastic panel in front that covers the four drive bays. There's a button on the left that lets you slide the panel off, and it's held firmly in place with magnets. This keeps someone from accidentally removing a drive and makes the TS-464 look nicer than some of its competitors, but the type of plastic attracts all of the dust in the environment. You will enter the BIOS Setup.Press the right arrow key to navigate to the Boot settings screen, and select "Hard Drive BBS Priorities"

There used to be a time when different NAS devices had somewhat significant differences in read and write performance on a regular Gigabit Ethernet connection, but those days seem to be gone, with NAS devices practically saturating the connection.

Available Models

The TS-464 comes with an Intel Celeron N5095 CPU that has four cores, four threads, runs a base 2.0 GHz and can burst to 2.9 GHz. The processor has Intel UHD Graphics built in, running at 450 MHz with bursts up to 750 MHz, making it a very good candidate for use as a video streaming platform if you need to transcode your files. This is big advantage over the recently reviewed Synology DS1522+. For the model,TS-431XU/TS-831XU/TS-1231XU/TS-832XU/TS-1232XU, which does not have USB copy button, please do below steps instead. Unfortunately, most home and even prosumer network gear does not support 2.5GbE. You can get them from QNAP, but if you want something from a company like Ubiquiti, you have to move up to their Enterprise line, which isn't very practical in a SOHO environment. Applications QTS is the operating system for entry- and mid-level QNAP NAS. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. System

After that, simply plug in the included Ethernet cable, connect the power, and turn it on. Initial Setup Note: The application is available in the App Center and in virtual appliance marketplaces (VMware vSphere ESXi and Microsoft Hyper-V). The entire interface of VirtualizationStation 3 has streamlined the process extremely well. In addition to creating your own VMs, there's a VM Marketplace. Similar to the QNAP App store, these marketplace has ready-to-use appliances. To use one, simply select it, provide some basic information like the name, CPU cores, and memory, and QNAP takes care of the rest.

Select the USB flash drive as your boot device. If you didn’t the menu and the system continues to process with the command line mode, please reboot the NAS and repeat the step 4. Since I only had 4GB of RAM in the review unit, virtualization was difficult. By default, the Windows 10 image wanted to use 4GB of RAM itself, but after accounting for the QNAP OS, I only had three to spare. I was able to modify the requirements, but that negatively impacts performance: It took over two minutes to boot up the Windows 10 VM. It also means that, unless you're running small instances, you won't be able to do much with the virtualization unless you upgrade to 8GB of RAM. Miscellaneous Observations An Integration Platform as a Service (iPaaS) solution that enables you to connect apps and devices with QNAP NAS for automating daily tasks for greater productivity. clonezilla-live-2.5.0-25-amd64.iso" as your ISO file. (for HS-453DX, TS-251D/TS-451D/TS-253D/TS-453D/TS-653D/TS-251B/TS-253B/TS-453B/TS-653B/TS-253Be/TS-453Be/TS-453BT3/TVS-675/TS-677/TS-877/TVS-951X/TS-1277 only) First up are the enterprise workloads, where we measured a long sample of random 4K performance with 100% write and 100% read activity. For IOPS, the NAS gave us CIFS scores of 292 IOPS read and 669 IOPS write. iSCSI hit 2,553 IOPS read and 444 IOPS write.