Apollo Ultrasonic Füllstands-Sensor Standard Standard Betriebsspannung (Bereich): 150-250 V/AC 1S

Product Information

Q10. What do the Error readings mean, and how do I rectify the issue? Q11. What kind of battery is used in the transmitter?

Tank mounted ultrasonic transmitter unit, compatible with the standard 32mm port fitted to modern plastic oil storage tanks(please ensure adequate space on tank to mount transmitter) Home heating oil users can ascertain the volume of fuel remaining in their tank, and monitor heating costs, consumption and emissions too. How the Apollo Ultrasonic Smart Oil Tank Level Monitor Works: Water Pumps & Controllers Submersible Water Pumps Clean Water Pumps Booster Pump Sets & Water Pump Stations Water Controllers Water Softeners & Purification Water Softeners Reverse Osmosis Systems More Water Softeners & Purification

Apollo Standard

urls] => {"urla":false,"urlatext":"","targeta":"","urlb":false,"urlbtext":"","targetb":"","urlc":false,"urlctext":"","targetc":""} The transmitter benefits from the provision an inbuilt LCD display. This allows fuel delivery personnel to monitor the level of fuel inside the tank before, during and after refuelling.

The Apollo Visual Fuel Level Monitor is suitable for use with any tank up to 3 metres tall, storing Adblue, Biodiesel to British Standard BS EN14214, Heating Oil / Kerosene (C1/C2); Diesel (D), Agricultural Fuel Oils to British Standard BS2869 and Water. Ideal for monitoring heating oil and diesel – but suitable too for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. Range The receiver is equipped to give you a number of different readings based on the information it receives. Its primary function is to show the level of oil/liquid in the tank by way of bars on the screen. The more bars you see, the more oil you have in the tank. Each bar represents 1/10 th the height of your tank, e.g. if there are 5 bars showing, this would indicate your tank is half full. The bars will begin to recede as you gradually use the oil in the tank. 10 bars tell you that the tank is full and when the level reaches a low preset level in the tank an “Early Warning Nozzle” is shown. As the level drops further, the “Almost Empty” red light will flash on the screen. Probably the most effective and aesthetic ways to hide an oil tank is to surround it with shrubs, trees, or potted plants that can help to camouflage the tank from view. Make sure you the plants are properly maintained, as they can become a fire hazard if not cared for properly. Hot Water Cylinder Accessories Immersion Heaters and Controls Kingspan Ultrasteel Hot Water Cylinders Flomaster Hot Water Cylinders

Tanks should only be filled to 95% of their brimful capacity. In the event that the tank is filled to the top, this will not harm the transmitter as it is a sealed unit. If the tank is filled to the top as described then the oil/liquid will be too close to the underside of the transmitter and will result in incorrect readings or a flashing triangle error on the receiver device. When the oil/liquid level drops to 100 – 120 mm from the top of the tank, the readings will return to normal without any adjustments or action needed. Certainly, the Apollo can be used on multiple piped tanks as long as the volume of oil in the tanks drops at an equal level in each tank. You can place the transmitter on one of the tanks in the same fashion as a single tank installation. It is as simple as that. The Apollo Smart is suitable for use with storage tanks that fit within the limits in the adjacent table (these apply to the inner tank for Bunded tanks) Ideal for monitoring heating oil and diesel – but also suitable for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. Range: