Joined in 2023 
82 
63 About this deal
The more coats of gloss sealer that are applied, the glossier it will be. Most products recommend using two to three coats of sealer. One coat may not be enough to create a durable seal. Over application will result in white patches which are difficult to remove as the product is designed to be resilient.
To make things easier, the seal has a slightly milky colour when wet, which makes it possible to see which areas have already been covered. One 25 L bottle should be sufficient for the majority of spaces. Essential limestone sealer satin finish – Best suited to internal and external limestone surfaces. Also effective on sandstone and slate. As long as the patio is thoroughly dry and clean of debris before application, it can produce a non-slip, low-sheen finish which protects the slabs from water, stains and wear. The exact area that one bottle can cover is dependent on the porosity of the patio and how the seal is applied.A single coat may be sufficient for some uses indoors, but for the most part at least two (if not three) coats will be required. The more coats that are used, the glossier the finish. It can be applied with either a roller, brush or sprayer, and the liquid has a reasonably low viscosity.
You can use a roller or brush to apply the product depending on the one that you are comfortable working with, I personally think a roller is easier. The 5-litre sealant can keep your patios protected for up to 5 years depending on weather conditions and use. Pros application of natural stonesealer will greatly inhibit, but not always prevent,the formation of algae, it willgive long term stain protection and enable far easier removal of any re-growth.Any subsequent growth can be easily removed by application of our fungicidal wash by watering can, with no scrubbing or pressure washing required.You’ll also need to decide whether you want a water-based or solvent-based sealer. If it’s your first time applying sealant, a water-based sealer may be best . They’re relatively inexpensive and easy to clean up if spilled. They also don’t have a strong chemical smell like solvent-based sealants. Leave to dry thoroughly for at least a week before continuing, you want any sand in the joints to be dry before you continue. The Bond It Patio Paving Sealer is also relatively effective against the growth of mould and algae. Although it may not stop it from growing altogether, customers have reported noticing a dramatic decrease in the amount of mould present on their patio.
Apply first coat very thinly over the surface area with Sprayer or Roller, leave for at least 1 hour before applying second coat. Choose dry time of year. As mentioned, you need a dry spell (preferably of at least a week) when applying patio sealer to make sure you get the best results. The addition of a wet look sealer is a highly decorative feature that boosts the look and feel of any space. Choosing the best wet look sealer to suit your surface is important. Choosing The Right SealerWater-based sealers are mixed with a resin. This resin might be acrylic or polyurethane. Because they are water based, these sealers do not have as strong a smell as solvent-based sealers, making them more pleasant to use. Sealing Indian sandstone regularly is, naturally, going to give it the best protection. However, the biggest sealer manufacturers will answer this question a little differently, as it differs from product to product. Choose a method that you are comfortable with because it is only you who understands the area that needs coverage. Gloss sealers can offer a range of finished, from a light sheen, to a ‘wet look’, to high gloss. Most people who are looking for a relatively subtle gloss on their patio want to achieve the ‘wet look’. This is designed to replicate the richer, darker appearance that paving gains after rainfall. Our couriers do not deliver on a Saturday or Sunday (or bank holidays) other than by special additional arrangement.
Related:
Great Deal 
New Comment