Dencon 45A Consumer Unit Fuse BS1361 Pack of 2

Product Information

Switch fuse units distribute current while shielding cables and devices from the damage that would be caused by power fluctuations along a particular electrical circuit. Switch fuse units are used in industrial and commercial buildings as well as domestic properties.

So, as you can see, using the correct cable and fuse/MCB for your appliance is absolutely essential. I will admit to have MCB’s rated 13, 16, 20, 25, 32, 45, 55 would match ref method 100 however not all cables are thermal plastic or installed ref 100 and there are other items with a current rating other than the cable ceiling roses often 5 or 6 amp. With domestic the shower is about the only item rated over 32A even when the cooked is rated over 32A with diversity we still can use a 32A MCB. One point to note is that your electric cooker should be installed within 2 metres of the cooker control unit, however due to the obvious heat generated by the cooker, it should never be installed above it, it should be places slightly to the side. What Different Types of Electric Cooker are There?This will allow you to see exactly what’s going on behind it in terms of how much length you have on the cable connecting it to the cooker control unit. Once in place, ensure the sides of the cooker are flush with the edge of the carcass so that it can be screwed in place. If you have a circuit breaker type consumer unit, you will know if there is an RCD fitted as it will be a bit wider than compared to one of the circuit breakers and it will also have a little button with either a "T" or "test" marked on it, that when you press, trips out the RCD. For FK sake stop pratting about and do what you know needs to be done and get a modern CU fitted by a competent spark. if your cu does not match any of theese descriptions then you should use a seperate shower unit like this

The time taken for a particular type of fuse to blow is called the fuse speed. The three principal fuse speeds available are:

What Type of Switch, Cable and Fuse/MCB is Needed for a Cooker?

Surface mount devices (SMDs) are electrical components that sit on the surface of printed circuit boards (PCBs). SMD fuses are available in both resettable and non-resettable forms. If however you are dealing with wires using the new wire colour scheme, they are as follows ( more information on wire colours can be found in our project here):