Badger Air-Brush Co 155 Anthem Airbrush

Product Information

The main question is how fine do you need to spray and what are the largest areas you are looking to cover and what is your current setup giving you? The Anthem is a comfortable, reliable, proficient, cost effective, user friendly airbrush. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem also provides flawless performance in the most rigorous of production airbrushing environments. Not sure which other parts were also changed, normal route would be; 0.3mm needle, nozzle, nozzle cap and needle cap. The Badger 155 Anthem Airbrush is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. Badger 155 Anthem Airbrush Features:

The revolution was a good introduction to modelling, but isn't flexible enough. As noted, the .35mm set up wasn't working for larger areas, but it will be the weekend before I can play with the various nozzles and some water or food colouring to see what coverage I can get with the standard 0.3 set up. The Anthem is a comfortable, reliable, proficient, cost effective, user friendly airbrush. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem also provides flawless performance in the most rigorous of production airbrushing environments.

Requirements & Suggestions

We have a number of customers in your part of the words, so you may know someone that has one you can have a go with. Single needle/nozzle for spraying all mediums such as inks, dyes, watercolors, acrylics, enamels, lacquers, glazes and latex. The Patriot, Model 105, is a comfortable, reliable, cost-effective, user-friendly gravity feed airbrush, designed for use by experienced, as well as novice airbrush enthusiasts. Its two angle needle tip precisely mates with the Patriot’s cone shaped nozzle, enabling a single needle/nozzle configuration to spray a variety of materials, while eliminating the need for multiple needle/nozzle variations. It has a 1/3 ounce permanently mounted color cup with a convenient spill-proof cap. It has a 0.2ml nozzle set that paints down to about 1mm for detail, the internal 0.5ml or small 2ml paint cup can be used for this. As well as a 0.4mm nozzle set and 5ml paint cup for larger areas. It also has a preset handle to set the maximum paint flow.

I was wondering if anyone here has any any experience with either or both and what your opinions are of the airbrushes? What are they like for fine, detailed work? Do they work well enough for larger areas or do you have another go-to brush for base coats, etc. http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1 The needle bearing is Teflon, and Badger will replace it free if it ever wears out or gets damaged. On flexibility for the future, you can add a 0.15mm nozzle set for ultrafine work and a 0.6mm nozzle set for very large area work. There is also a micro paint cup that covers the cup thread if you are doing a lot of detail work as well as 15ml, 50ml and side feed 15ml bottle options available. The Anthem®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. Features

Reviews

Single needle/nozzle for spraying all mediums, inks, dyes, watercolours, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colours If you get dry paint building up on the air cap, this will allow you to just pinch clean the tip and for fine detailing gives you a great view of the needle tip. Coverage with the model you show may not be due to the airbrush itself but how your using it, you may be too close when spraying, getting wetter areas than others The Patriot is a low maintenance airbrush, easy to clean and simple to operate; it will spray any properly reduced paint or airbrush-ready media. The Anthem®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments.

Paul http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1 I'm thinking about upgrading from my Iwata Revolution BCR. I upgraded the airbrush with a 0.3 mm nozzle and 0.35 mm needle (the 0.3 won't fit the triple action handle). The 0.35 mm is great for detailed work, but it doesn't give great coverage for base coats (see the patchy job below). Unfortunately it's a pain to swap out needles, nozzles, and the action on the handle when I want to paint a larger area. I'm thinking about upgrading to an airbrush which is either easier to swap out needles and nozzles or which can reasonably manage detail and lay down a larger area of paint when needed. I was initially looking at the Badger 150, but I'm intrigued by the Badger 155 Anthem and the 105 Patriot. The 155 and 105 have a dual taper needle, allowing fine detailing and wider coverage. The 105 has a finer needle and nozzle than the 155, but it looks able to lay down a lot of paint when required (base coats, single colours, gloss coats, etc). The Anthem ®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem ® also provides flawless performance in the most rigorous of production airbrushing environments. FEATURESThe triple action handle was good for ease of cleaning, but it's also good for fine(ish) work, such as pre-shading panel lines by setting the amount of paint required.

Don't spray too far away from the model either as your likely to get a rough finish where the paint is drying before it hits the model. Swapping from one nozzle set to another takes about 20 seconds and you don't need any tools for this or to strip the brush down to it's component parts.Developed to deliver precise performance and fine line detail, the Patriot is an ideal airbrush for custom art, graphic arts and illustrative work. The Patriot airbrush will operate at 30 PSI, as well as lower pressure settings (10-15 PSI) and is ergonomically balanced for hours of comfortable airbrushing.