SlipDoctors Non Slip Floor Coating for Laminate, Vinyl, Lino & Wood Floors – Floor Grip by SlipDoctors – Highly Durable Slip Resistant Sealer – Gloss Finish Treatment

Product Information

TEST SAMPLE: Floor Grip should be tested on flooring surfaces before full application. To prepare test sample, pour a small amount of Floor Grip into a separate container with a small amount of additive, mix well. Apply to a clean inconspicuous area of your floor and allow to dry completely. Coarse grade anti-slip tape and pads are designed for medium to heavy pedestrian foot traffic. This anti-slip tape is for stairs, walkways, machinery and vehicles. Vigorously shake the bottle for 2 to 3 minutes. Pour the anti-slip coating into a container and mix well to ensure there is no clumping of the texture. GripX anti-slip coating needs to be rolled on to the surface using a high-quality lint free paint roller and a applied as thin uniform coatings. Always apply 2 coats to every surface to ensure the highest level of durability. Allow the first coat to dry for 2-4 hours before applying the second coat. The second coat should be applied at a right angle to the first coat. If you or your athletes/clients have an injury, it is best to get it looked at before swapping exercises and hoping for the best. In the below section we discuss the various strength, power, and fitness athletes who can benefit from integrating the floor press within strength and accessory training programs.

Slips and trips in the workplace The HSE has a number of guidelines on the responsibilities of employers to maintain flooring safety in the workplace. According to the Health and Safety at Work etc. Act 1974, it is your responsibility as an employer to ensure the safety of employees and visitors to the workplace, and this includes ensuring that the flooring is safe and that slip-prone areas are well-marked. Aesthetic Value: Increasingly, more architects have discovered the aesthetic attributes and structures of perforated metal flooring and walkways, for example, architects commonly use Graepels metal flooring as ceiling lining and facade cladding. Our product range can also be used as enclosures and covers for machines and installations. Read entire product label,Technical Data Sheet (TDS)and Safety Data Sheet (SDS)before using.Floor Grip should not be diluted or thinned in anyway. Gloves should always be worn when handling product.

Anti-Slip Tapes Buying Guide

Yes, and you should try it. The kettlebell floor press reinforces proper wrist positioning, scapular stability, and lowering of the weights. This is a great warm-up movement to educate a lifter on maintaining scapular and wrist stability during the bench press. Should you lie on a pad when doing floor presses? Add appropriate amount of additive to solution, depending on number of coats, and mix well. Medium texture is recommended. Read additive bottle label for instructions. Using a paint roller, apply Floor Grip in uniform coats at a moderate speed to prevent Prior to the coating application, remove all dust from floor and surrounding structures. Always protect neighboring surfaces including carpet, metal and other surfaces. The restricted range of motion (since the elbows hit the floor before the pecs can fully stretch) increased the loading and demands placed upon the triceps to extend at the top, having great carry-over to the bench press and other pressing movements. More Upper-Body Strength Below is a step-by-step guide on how to perform the floor press. Note that in the below instructions, the barbell floor press is demonstrated. However, the steps are nearly identical if you were to use dumbbells or kettlebells (both of which are fine options.)

If working with previously sealed surfaces any chipping or flaking should be sanded or scuffed to a sound surface. If the sealed surface is sound, lightly sand with a soft grit sandpaper to promote adhesion. Scrub and clean surface with pH-neutral cleaner. Rinse thoroughly and allow to dry before application. GripX cannot be applied over wood, synthetic, or painted surfaces. Not only does GripX increase the slip resistance of the surface but at the same time will seal the tile or stone surface to prevent water damage, scuff marks and scratches. The textured grit finish is completely barefoot and paw-friendly making it perfect for slippery bathrooms, showers, kitchens or smaller kitchens, patios and balconies. The floor press is a pressing movement used to increase the size, strength, and performance of the upper body, specifically the triceps and chest. Below are the primary muscles used, in the floor press movement: Pectorals (Chest) Below are three primary training goals and programming recommendations when programming the floor presses into workouts. Note, that these are general guidelines, and by no means should be used as the only way to program the floor press. To Gain Muscle

Rhombus | Safety Flooring Types

Thanks to the formulated UV protection GripX can also be used on slippery outdoor surfaces that may get a lot of sun during the summer days. The application is very simple, clean the surface and roll on 2 coats of GripX anti-slip coating to ensure the highest level of slip resistance and durability. Our exclusive roll-on anti-slip coating is a clear, self-leveling 100% waterborne urethane sealer that helps prevent slip-and-fall accidents when properly applied. Designed for creating an anti-slip coating on natural hardwood floors, engineered hardwoods, bamboo, vinyl, vinyl composition tile VCT, LVT, linoleum, laminate, cork, epoxy, and previously sealed floors. https://youtube.com/watch?v=fW7FrLgksi0 Video can’t be loaded because JavaScript is disabled: Floor Pressing with Chains 10-12-2014 and Assistance | RetroPL (https://youtube.com/watch?v=fW7FrLgksi0) Concentric Floor Press The floor press can isolate specific aspects that may be limiting a bench press, increase upper body strength, and be used to add variety to general pressing programs. SlipDoctors GripX is a durable anti-slip coating specifically formulated to increase the slip resistance on tiles, natural, stamped, and stained concrete, sealed surfaces, and most other natural stone. GripX is an easy-to-apply roll on coating that once cured has a semi-gloss textured finish and can be used indoors or outdoors.

Our standard anti-slip tape offers high traction and durable protection underfoot for light to medium pedestrian foot traffic for steps, stairs, and walkways. This anti-slip tape feels more like rubber, which makes it appealing to the touch while giving exceptional levels of grip, plus we slightly alter the embossing pattern of the upper surface.P102 Keep out of reach of children.P101 If medical advice is needed, have product container or label at hand.P280 Wear protective gloves/protective clothing/eye protection/face protection.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P403 Store in a well-ventilated place.P235 Keep cool.P501 Dispose of contents/container to … Surface Preparation: Clean surface using pH-neutral cleaner or power-wash, rinse and allow to dry thoroughly before application. Ideally the surface should have been dry for a few days to ensure there is no moisture trapped underneath before sealing. For best adhesion, the surface can be lightly sanded with a soft grit sandpaper or etched using SlipDoctors Maintain Grip.

GripClad®’s abrasive standard tape provides excellent levels of grip and friction, and abrasive coarse tape provides industrial grade grip. Now drive the weight until your elbows are fully extended. Make sure to not over protract (bring your shoulder blades forward) at the top when completing a rep, as this could throw your positioning and base out of line.Surfaces must be thoroughly cleaned. *Not required* For increased adhesion by sanding use a maroon pad or 320-400 grit sandpaper to lightly scuff the floor.