Cisco Systems Glc-Te= 1000Base-T Sfp Transceiver Module For Category 5 Copper Wir In - (> Media Converters)

Product Information

The GLC-BX-D-I and GLC-BX-U-I are the Industrial temperature rated (IND) counterparts of GLC-BX-D and GLC-BX-U SFPS. This allows link operation in harsh environmental conditions where the module case temperature can be in the range -40°C to 85°C.

While existing 10GBASE-T switches such as the Cisco ® Nexus N93108TC-FX can provide such connectivity today, the introduction of the SFP+ modular form factor enables variety and flexibility in deployment. Instead of having to deploy a second dedicated 10GBASE-T switch, the SFP+ module can enable Cisco 10G and dual rate 10/25Gbps switches and routers to connect to 10GBASE-T RJ-45 endpoints using CAT6A cables. This Cisco® GLC-TE compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Technical Specification Compatible OEM The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards. The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment *. For more details, refer to the document SFP Compatibility Matrix at: https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdfCustomers are encouraged to migrate to the Cisco 1000BASE-T SFP replacement module. Information about this product can be found at: http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/gigabit-ethernet-gbic-sfp-modules/product_data_sheet0900aecd8033f885.html . The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.

FluxLight offers all brands and form factors of Optical Transceiversfor all your networking needs. Now you have a reliable, compatible and affordable means to expand your network while maintaining its integrity. The SFP-10G-T-X will be supported on a variety of Cisco platforms, including NCS 5501, Nexus 9000, and Catalyst ® 9000. However, the maximum power consumption of SFP-10G-T-X (rated 2.5W per port at 30 meters) imposes certain restrictions in deployment. Typically, the SFP+/SFP28 ports on Cisco switches are designed and rated to support transceivers that can dissipate up to 1.5W power. Given the higher power envelope of SFP-10G-T-X, Cisco switches and routers will not be able to fully populate a chassis and deploy all possible ports with the SFP-10G-T-X.

{{-StoreInStore.PartnerMessage}}

The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html . ProLabs extends network infrastructure capacity with its cost-effective portfolio of OEM-compatible. Read More White Papers 100G Beyond 10KM