For other reasons, based on my knowledge and experience as a professional engineer, I bought the Veritas smoothing plane. It does all I want it to and does it well. If I had wanted to save money in the initial expenditure I would have bought the Luban plane. I would never buy the Stanley plane. If the word STANLEY is on the lateral adjustment lever in a vertical script, the plane Type is 19 and dated between 1949 and 1961.

Made from Forest Stewardship Council (FSC) certified cherry wood, the handle and knob are shaped to fit the hand naturally and comfortably, providing comfort in extended or repetitive use.If you do buy a 9" plane, it's seriously worth considering a low-angle plane (lower bedding angle, higher angle on the blade). Among other things, that gives you a wider range available if you need to grind blades to other angles when handling special cases. These do tend to be a bit more expensive, though, largely because this design is mostly offered by the higher-end manufacturers. As you examine the plane, look for a raised ring that works as a receiver of the knob cast into the bed. In some cases, there is one patent date, and no raised ring, meaning your plane is Type 13, and the dates range from 1925 to 1928. If there is one patent date and a raised ring, the plane type is Type 14, which dates between 1929 and 1930. If there are no patent dates and raised rings, you also have a plane Type 1 to 8. Stanley Type 12 Handplanes date 1919-1924. The knob is taller than the previous style. The taller knob is called a “high knob.” The brass depth adjustment nut is measured at 1.25″ in diameter, which is larger than the previous one. There are logo changes.

The blade across the width was totally flat down the length it was slightly concave but the smallest feeler gauge I had 0.003″would not go under the straight edge.The blade came with a sharp cutting edge Stanley Type 9 Handplanes date from 1902-1907. No patent date on the lateral lever. “B” casting marks are eliminated. The number designation is now cast just behind the knob. A smaller bearing surface is cast into the bed. The frog has a slot at its bottom to fit over the ribbed cast in the bed. Is there any other physical difference that makes a No.4 more useful for smoothing, other than it's smaller size and weight making it easier to handle?Stanley Type 7 (Stanley no 7 plane identification) Handplanes date from 893-1899. The number designation is spaced farther apart. Bailey’s name and patent dates are no longer on the brass adjustment nut and cap iron. Stanley Type 15 Handplanes date 1931-1932. They remove all patent info on the bottom casting. “BAILEY” is now cast behind the knob toward the rib, and the number is directly in front of the knob.