TCP Smart Wi-Fi LED IP65 Tapelight Extension Kit Colour Changing

Product Information

How to install LED strip lights in the kitchen? LED strip lights look most effective when the strip is hidden away and only the light shows through. This could be underneath shelves, cabinets or worktops for maximum effect. Most of the time, the situations with these lights not turning on are more related to the hardware and not minor configurations. This can be quite annoying and feels heavy on your eyes. If you’re in a similar situation, then here are some fixes you can follow. How to connect LED strip lights to plug? You will need knowledge of plug wiring to be able to connect your driver to a plug. If you are unsure, consult a professional to make sure the connection is sound.

First, scrape the plastic cover off the end of your LED strip with a sharp knife or box cutter. This will expose the copper dots that you can connect two pieces together. The most common issue that users have mentioned while using the TCP lights is that they’re not able to get the smart lights connected to the Home Network. Another very common issue with TCP lighting is that users can’t get their smart lights to work with Alexa. You can then insert the ends of the tape, with the copper terminals exposed, into the fastening clips.Most of the time, the experience with these lights will be effortless but if you’re not too sure about the power status, then reaching out to a local electrician is a better idea. There are still some issues you can run into now and then when installing the units yourself for the first time. How to install LED strip lights in the shower? Make sure your bathroom is completely dry before you install strip lights into your shower. If the surface is wet, the adhesive will not take to the surface beneath it. Always use fully waterproof strips if they will be exposed to water regularly.

How to connect the remote to LED strip lights? If your LED strip lights can be remote-controlled, the strips will need to be connected using a receiver between the LED tape and the driver. This will mean you can change colour temperatures or RGB colours with a remote or phone app. The heater runs in this way instead of turning off to avoid any risk of the heater accidentally being left on in Auto mode when the leaving the home because it looked to be turned off.You need to make sure that it matches the requirements mentioned in the user manual. Otherwise, you will keep running into similar issues. Reheat the puddles you made previously on the LED strip and hold the wire in place until it solidifies. However, if the lights are damaged, and you’re not sure about the hardware, then claim the warranty immediately. The warranty is valid for 12 months, and you can seek help from professionals to get a new one. LED Pro Line Strip Luminaire – 8′, 65W, 40K SKU: PSP8UZDA840K View Details View Spec Sheet Read more

Full control of the lights is through the app. As with other TCP products, such as the Smart WiFi Plug, there’s a choice of two apps: the TCP app or SmartLife. This is because the underlying technology is based on SmartLife. I prefer to use the SmartLife app, as I can combine devices from different manufacturers into one place. In both cases, the control and interface are the same. Using a dimmer switch can also cause your smart lights to behave like this. If the lights are not compatible with the dimmer, then you can’t make use of these systems with the dimmer switch.Connectors can also be used to attach your LED strip lights to their power source via a driver. If you are using multiple strips, they will all need to be connected to the driver to stop them from dimming from one strip to another. So, if the reading on the voltmeter or the multimeter is not optimal, going with a different source is a better idea. Even after pairing up the skill with the Alexa app, whenever they try using voice commands to turn on the lights, they will not respond. Here are some possible fixes for this problem. Simple to install, and offering great value, these outdoor lights are are fun addition to any garden. However, Wi-Fi over Bluetooth would have been better, and the bulbs are a touch ugly when turned off. Design and Features