Everbuild Black Jack 901 | Solvent Based, Full Bodied Black Bitumen Paint - Protective Coating for Concrete Structures, Stone & Concrete Screeds - 5 Litre - Black

Product Information

You’ll find bitumen paints used in all sorts of situations. A versatile paint, it can be used on both ferrous and non-ferrous metals as well as concrete, wood and masonry. Best results are obtained in warm (minimum 10°C), dry conditions and we recommend application of 2 coats. Use Conventional or HVLP spray, brush or roller. Our bitumen paint products We don’t have any exact figures on this except to say that a bitumen coating would increase the overall lifespan.

Everbuild Black Jack All Weather Roof Coat 5L | Toolstation

Ensure surface is in suitable condition for painting and free from grease, wax or penetrating substances. If previously painted, remove loose or flaking paint.Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.

Questions about bitumen paints - Answered Palatine Paints

Porous, or ‘thirsty’ surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 750ml tin will provide less than 6m 2 of full coverage. If you apply the paint too thinly, durability may be affected. I consider this approach to painting to be similar to that of recommending PVA as a primer coat for an emulsion paint system. You may be storing up future problems. However, I trialled this a number of years ago, and have since used it on both smooth planed timber fascias and rough sawn wood. Not only does it give a beautiful finish, but there have been no signs of flaking whatsoever, and all that timber is South-facing. Some trellis work which only received a single coat is now showing areas of weathering - but no flaking. A top-up coat can just be slapped on to the secure layer below. Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting. It’s frequently used on metal guttering, fire escapes, stairways, ladders, railings and fences. In the marine sector, bitumen paints are commonly used on boat hulls.While it’s generally reasonably heat and UV stable, its lifespan may be reduced in extremely hot and sunny countries. For ferrous metal, treat rust, remove any loose or flaking coatings and sand smooth - in these circumstances, we recommend 2 coats of Frenchic Finishing Coat as a base for the paint. The steel will be hot dip galvanized (120 micron) and coated with epoxy paint. However, we intend providing an additional two coats of bitumen paint taken up to 50mm above ground level (tarmac path). Carbosil Bitumen Aluminium is for over-coating bitumen-based surfaces. It helps protect surfaces from heat/UV light damage, with a decorative coating and will enhance the lifespan of bitumen-type roofing materials. The flexible, heat resistant and solar reflective surface has outstanding weather resistance and durability. Ideal for use on roof structures, storage tanks, silos, mobile homes and caravan roofs. Reflects heat in the summer and insulates in the winter. General purpose, solvent-based. waterproofing paint. Provides a hard wearing, protective layer on wood, metal and cement. Suitable for brush application only.