The product should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. Warning! Protective equipment should be worn. Not to be used in traffic. Always wear safety equipment (helmet, elbow-pads, kneepads, gloves). The parking devices on the rear wheels must be pointing inward when they are installed for all trike stages. See below instructions on how to install the parking bar on the wheels: Press the red button on the side of the middle column of the safety bar to release; repeat for the left- and right-hand side bars.

Some of our most popular girl scooters and boy scooters are pink scooters, blue scooters and lime green scooters, but we offer a wide range of colours for girl scooters & balance bikes and boys scooters & balance bikes to break the trend! The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. Put the seat on top of the saddle; make sure the knob on the seat is aligned with the saddle slot, so it can slide through the saddle slot. To secure the seat to the saddle, turn the knob under the seat 90 degrees. Insert the middle safety bar in the hole at the front of the seat; press the red button on the side of the middle safety bar and push until the red button is hidden in the seat. Slide the sides of the safety bar into the gaps on the side of the seat. From Infant Trike when your children are 10 to 36 months, to Guided Trike for 18 to 36 months, to Training Trike for 24 to 36 months and for when they are ready, a Balance Bike for 2 to 5 years.When assembled as a toddler tricycle, it can be adapted for when kids develop. From Infant Trike when they are 10 to 36 months, to Guided Trike for 18 to 36 months, to Training Trike for 24 to 36 months – and for when they are ready, a Balance Bike for 2 to 5 years. height adjustable saddle with soft, anti-slip TPR (31cm, 34cm from the ground) and curved handlebars with comfortable and durable TPR ergonomic grips for comfy rides.

Warning! The parking bar of the parking system is only applicable for the infant trike mode. Remove the parking bar before using the products in other modes. The following steps assembles your EXPLORER TRIKE 4in1 into infant trike mode. For a detailed guide on how to transform your EXPLORER TRIKE 4in1 into its different modes, refer to this article on how to switch EXPLORER TRIKE series between different modes. Rear wheel installation Do not use on the public highways, examples of safe riding area: To be used on flat and no gravel areas (playground, Public Square) To remove the parent handle, you must press the red button under the trike’s frame; then release the shaft and carefully lift the parent handle out. ANTI-SLIP HANDLEBARS Curved with soft TPR grips, the handlebars are comfy and durable throughout use.

Clean trike with a slightly damp cloth (cold water) and mild soap. Never use a corrosive or abrasive substance to clean the product. Install both wheels with the parking bar into the trike’s frame. Place both wheels in the hexagonal slots at the rear of the trike frame and ensure that the parking devices are upwards and don’t touch the ground. Once the wheels are in the correct position, you need to screw the knobs into the wheels’ slot to ensure the wheels will remain securely in place. Put the seat on top of the saddle. Make sure the knob on the seat is aligned with the saddle slot, so it can slide through the saddle slot.