Makita SP6000J 165mm Plunge Cut Saw Complete with Connector Case/ Hex Wrench and Carbide-Tipped Saw Blade

Product Information

There’s no doubt that the Makita SP6000 is an impressive tool. However, there are a few things you may not like about it. Power AMP motor with variable speed control dial (2,000 - 5,200 RPM) for optimum performance in a variety of materials The SP6000J2 is engineered for cutting sheet material, finish work, trim work, and remodelling. It is ideal for a broad range of trades, including cabinet installers, cabinet manufacturers, finish carpenters, stair installers, flooring installers, woodworkers, and general contractors seeking a best-in-class 165mm Plunge Circular Saw.

Makita Plunge Cut Saws | Powertool World Makita Plunge Cut Saws | Powertool World

Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevel The Makita SP6000J1plunge cut circular saw kit editionoffers outstanding cutting accuracy and versatility. Supplied with 2x 1.5 metre Guide Rails, Guide Rail Connector Bar and Makpac Type 4 Case.

General

Built in soft start eliminates sudden movement on start up that may misalign the position of the rail I am always trying to come up with better and more efficient ways to work. My Multi Purpose Table (MPT) design came from my desire for a more efficient way to work along with being able to build it myself rather than buying something commercially made. A result of the Imagine-Design-Build process. MAKITA SP6000J1 165MM CIRCULAR PLUNGE SAW 240V WITH 1.5M GUIDE RAIL and Makita B-10344 165mm x 20mm x 48 Tooth Corian Circular Saw Blade for SP6000 Large rear dust port directs material away from the operator and easily connects to a vacuum system The saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting

Makita Sp6000 110 / 240 Volt Electric 165mm Plunge Circular Makita Sp6000 110 / 240 Volt Electric 165mm Plunge Circular

Large 1-7/16″ rear dust port directs material away from the operator and easily connects to a vacuum system The Makita has an 8' long power cord which works fine but it would be helpful if it was a little bit longer. Many of the newer power tools these days are being supplied with longer cords in the 16' range which come in very handy since in a lot of situations an extension cord can be avoided. Blade My son and were in the beginning stages of a banquette and table build so what better way to put this new addition through the paces? Guide Rail Setup metre Guide Rails (x2 + P-45777 single joining bar supplied) interact with the saw base to provide smooth, perfect, dead-on straight or bevel cuttingMAKITA SP6000J1 165MM CIRCULAR PLUNGE SAW 240V WITH 2X 1.5M RAILS, CONNECTOR AND MAKPAC CASE and MAKITA B-09298 165MM X 20MM X 48T SPECIALIZED BLADE FOR SP6000 PLUNGE SAW Slide lever on saw base designed to engage the optional guide rail (sold separately) when bevel cutting for stability

Makita SP6000J2 Plunge Saw 165mm inc 2x Guide Rails, Joining Makita SP6000J2 Plunge Saw 165mm inc 2x Guide Rails, Joining

The SP6000J has a powerful 12 AMP motor with soft start for smooth start-ups, and Electronic Speed Control to maintain a constant speed under load for smooth cutting. The variable speed dial control (2,000 – 5,200 RPM) allows the user to set the speed for optimum performance in a variety of materials. The built-in torque limiter helps prevent motor burnout, with an electric brake for added productivity. Guide Rails (sold separately) interact with the saw base to provide smooth, perfect, dead-on straight or bevel cutting The SP6000J1 has a powerful 12 AMP motor with soft start for smooth start-ups, and Electronic Speed Control to maintain a constant speed under load for smooth cutting. The variable speed dial control (2,000 – 5,200 RPM) allows the user to set the speed for optimum performance in a variety of materials. The built-in torque limiter helps prevent motor burnout, with an electric brake for added productivity. Large 1-7/16" rear dust port directs material away from the operator and easily connects to a vacuum systemBuilt-in depth stop allows a preliminary cut of 2mm to be performed before the entire material is cut through for clean and splinter-free cutting