Brasso Metal Polish, 175 ml

Product Information

When disposing of Brasso, make sure to follow the proper waste disposal guidelines in your area. Avoid pouring Brasso down the drain or throwing it in regular household trash, as it can be harmful to the environment.

Side-by-Side Comparisons for the Best Way to Polish Brass 8 Side-by-Side Comparisons for the Best Way to Polish Brass

If the surface is heavily tarnished or dirty, you may need to repeat the process to achieve the desired results. Be patient and take your time to ensure that the surface is thoroughly cleaned and polished. 7. Maintain shine

Brasso is a trusted brand that has been around for over 100 years, and it continues to be a favorite among DIY enthusiasts and professional cleaners alike. This versatile polish not only cleans, but it also creates a protective barrier to prevent tarnish from returning. With Brasso, you can bring new life to your metal items and keep them looking their best for years to come. Perform a small patch test to make sure the Brasso doesn’t mark or stain the surface you’re about to polish. It is important to note that Brasso may not be suitable for all types of glass, such as delicate or painted glass surfaces, so it is always recommended to test a small area before applying it to the entire surface.

Brasso Liquid Metal Polish 175ml | Wilko - Wilko Site

In addition to this, if you’ve used an appropriate amount of Brasso, and you’ve worked it into a surface and then buffed the surface again, you shouldn’t really have any excess Brasso left behind. So, you won’t need to ‘wipe Brasso off a surface’ per se. Using the cloth with Brasso, gently rub the surface in circular motions. This will help remove any dirt, grime, or tarnish from the surface. Be careful not to apply too much pressure, as this can cause scratches. 6. Wipe Away Excess Brasso If you do have Brasso residue leftover, either keep buffing it off the surface or use a clean cloth to remove it. Technically speaking, as you continuously massage Brasso into the surface you’re polishing, you will be wiping some of the product off as you go. This is what’s supposed to happen.Brasso is abrasive and will wear metal over time. The National Trust recommend alternative cleaners. [7] Other applications [ edit ] Tip: If you’re using liquid Brasso, always pour the liquid from the can onto a clean cloth. Do not hold a cloth over the mouth of the can because this transfers dirt into the can. This then contaminates and weakens the Brasso inside the can. How to clean with wadding Brasso: When you’re done using your Brasso you need to store it away in a safe place, that is out of the reach of children and pets. Method: Cover items in tomato juice and soak for about 5 minutes. You’ll see occasional bubbles surfacing. Wash with warm soapy water and dry thoroughly. What I changed: The original recipe did not mention to scrub with steel wool #0000, but when I did it was very easy to polish. Soak brass hardware in tomato juice for a few minutes, scrub with a #0000 steel wool. Rinse off and dry completely. Pros:

Brasso Metal Polish 1L - The Range

After cleaning, use a clean cloth to wipe away any excess Brasso from the surface. This will help bring out the shine and prevent residue buildup. 7. Buff for a Shine By following these effective tips for cleaning with Brasso, you can ensure that your surfaces are kept clean, shiny, and well-maintained for years to come. Advanced Techniques for Cleaning with Brasso 1. Removing Stubborn Stains

Remember, always read and follow the instructions on the Brasso bottle and test it on a small inconspicuous area before using it on the entire surface. With proper care and regular cleaning, Brasso can help you keep your metal surfaces looking shiny and beautiful. Choosing the Right Surfaces for Brasso 1. Metals Reaction happened faster with the aluminum foil in the pan as opposed to the same technique minus the foil While Brasso is not recommended for use on all types of plastic, it can be used to clean and polish some plastic surfaces, such as acrylic or Plexiglas. Keep an eye out for a blue and white striped pot that has a big red label on the front, with the name ‘Brasso’ on it. You should remove Brasso from small nooks before it dries– Use a small, slim tool that’s wrapped in a cloth to tease the excess Brasso from crevices. Leaving the Brasso to dry will just make it harder to remove, and you might not end up with the sleek finish you were after if there’s Brasso residue all over the place.