SCYTHE SCFM-2000 FUMA 2, CPU cooler - 2x120 mm

Product Information

Fan 2: 120 mm Kaze Flex PWM (4.0 - 24.9 dB (A), 300 - 1200 rpm, 28.2 - 86.93 m³ / h) (16.59 - 51.16 CFM) , 0.076 - 1.05 mmH2O So, even though the Fuma 2 did not cool as well as it could have, that extra four degrees in the tank hurt them a bit, but all around, we have very little reason not to recommend you buy this cooler, no matter what the motherboard is, no matter your memory arrangement, the Fuma 2 is here ready and willing for you to give it a chance!

My apologies for making more than one post about this. I can be a bit indecisive at times and I am not the most knowledgable on CPU coolers that work with NR200 builds. In addition to the heat sink and fans, Scythe also includes thermal paste, a screwdriver, and additional fan clips so that you can install a 3rd fan for increased cooling performance if desired,. Installing the FUMA 2 In my previous post, most people recommended the Fuma 2. After doing some research I’ve found that these two Scythe coolers are my best options in terms of price to performance. Performance-wise, they are fairly similar. Fuma has slightly better performance. Mugen has better noise levels. Mugen is cheaper. Intel LGA2066, LGA775, LGA115x, LGA1366, LGA2011 / 2011-v3 - AMD AM4, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ *There’s more to a cooler than just it’s heat sink. The fans included have a huge impact on cooling performance and noise levels. Included with the FUMA 2 are the Kaze Flex 120 PWM and the Kaze Flex 120 Slim PWM fans. Fan 1

Además, ten en cuenta que este ventilador es bastante grande, por lo que necesitarás una caja espaciosa para que encaje de manera adecuada en tu configuración. Asegúrate de tener suficiente espacio antes de adquirirlo. Estoy encantado de decir que este ventilador está funcionando a la perfección. Mantiene mi CPU a una temperatura óptima incluso durante las tareas más exigentes. No más preocupaciones por el sobrecalentamiento. Both of the Kaze Flex 120 II fans use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberised pads covering the frame have a decoupling effect and prevent the transmission of noise and vibrations to the case. H.P.M.S. IV (Hyper Precision Mounting System IV) The first tests were done with a TDP enforced at a 100w limit, because most consumers considering this cooler will likely be using a mid-range CPU like the Ryzen 5 3600x. Both coolers performed on par with each other – with the FUMA 2 winning some tests by a small margin, and the NH-U12S winning other tests by a small margin. Side note: I bought the Scythe Fuma 2 around late October and I live in the Southwest United States. I have yet to see how this CPU will perform with the summer heat. That will be the true test. I will update this review around October for the results.

Asymmetrical design allows unrestricted use of any front RAM slot, and cut-out fin design gives clearance(55mm) of rear RAM slot(LGA2011/2066). Standing only 155mm tall, the cooler fits most PC case on the market. Fan 1: 120 mm Kaze Flex PWM (2.7 - 23.9 dB (A), 300 - 1,200 rpm, 14.06 - 57.52 m³ / h) (8.27 - 33.85 CFM), 0.23 - 0.9 mmH2O