Silverline Mini Pipe Bender 6 - 10mm (MS129)

Product Information

The nylon guides are integral to the pipe bender helping to ensure they don’t get lost or damaged in a toolbag.

Each reader of the template should consult with his or her own qualified engineer prior to using the whole or any part of the template. On a few benders we seem to have overtigtened the nyloc nut and bolt which has reduced the gap on the Lever Arm.The standard finish of the benders is a bright zinc plate on the Arms with rumbled aluminium Former and Lever castings. When selecting products, the total system design must be considered to ensure safe, trouble-free performance.

First models of the new pipe bender were designed and 3D printed in the engineering suite at Monument.In this particular instance, we have designed a smaller and lighter weight pipe bender than the standard combination 15and 22mm hand bender. Place the Lever Arm over the positioned pipe and place the Lever Hook onto the Pivot Pins, ensure the Nylon Guide is seated.

We have included bending angles of 30 45 60 and 90 degrees on the XV and XVL 15mm versions and an additional 75 degree angle on the 22mm version; these are easily visible on the Former of each bender. They weigh under 500g, and that’s pretty-lightweight, but they certainly provide more than enough power to get the job done. If you have questions about this product, please contact your local authorized sales and service center. We posed this question through the Tooltalk App (see all the answers in the app available for iOS or Android AOS).When initially launched on the UK market Monument ensured that the hook stop was redesigned so as to not mark the pipe. When Monument look to design, manufacture and market a new product we look to create products which will save the engineer time.