Joined in 2023 
82 
63 About this deal
Another printer that is in a similar budget range that you may also want to take a look at is the Phrozen Sonic Mini 8k with an even more impressive resolution of 22 microns, but with the tradeoff being a smaller print volume. One of the more interesting design features is a removable panel in the rear of the UV cover that can be used to connect to an exhaust ventilation system to help further reduce odors for people who operate in small spaces and are concerned with fumes. The Elegoo Saturn 2 includes a pretty standard array of accessories that many other Elegoo resin printers ship with including tools such as the diagonal cutters for support removal as well as the metal and plastic spatulas.
Even though the LCD is scratch resistant, you will still want to be extremely careful if you did have any resin cure there, which is why it is best to avoid it in the first place. Tom's Hardware is part of Future US Inc, an international media group and leading digital publisher.
Whether it happens due to support structures that are unable to support the mass or any number of other things, you still will have a mess to clean up before you can print again.
It also gives more surface area for supports to hold on so the model is less likely to fall during printing. After letting the item completely dry, I then cured it and this prevented any white residue from forming on the prints, which can happen even with the water washable resins. With the Elegoo Saturn 2, I tested whether removing the cover would turn off the UV light source and unfortunately found it continues to emit UV light. This one is fairly straightforward since it doesn’t have any large solid sections, but it also has a lot of detail making it a great demonstration of a resin printer. The UA1204 and UA1207 boosters were considered, with the highest total impulse configuration using four UA1207 boosters, capable of placing 146,000 pounds (66,000kg) of payload into low Earth orbit.The Saturn INT-18 would have used the standard S-II with J-2 engines, augmented by two or four Titan SRBs. If you are looking for a mid-sized 3D resin printer or you need to print in a high level of detail, you really can’t go wrong with this printer. For this reason, we use cookies and third-party services to improve the services we offer, display relevant advertisments and receive usage statistics. Budget constraints led to cancellation of the study and exclusive use of the Space Shuttle for orbital payloads.
The reduced payload permitted a savings of 660 pounds (300kg) in structural weight, and omitting the S-IVB restart capability saved 1,500 pounds (700kg). The highest total impulse configuration would have used twelve boosters, with eight started at launch and four started after the first group had been jettisoned.From subtle, clean and warm tube or tape saturation to the wildest multiband guitar amp effects: FabFilter Saturn 2 delivers. The Saturn II was a series of American expendable launch vehicles, studied by North American Aviation under a NASA contract in 1966, derived from the Saturn V rocket used for the Apollo lunar program.
Final Report - Studies of Improved Saturn V Vehicles and Intermediate Payload Vehicles (PDF format), October 7, 1966.
The intent of the study was to eliminate production of the Saturn IB, and create a lower-cost heavy launch vehicle based on Saturn V hardware. For the prints in this review, I used some of Elegoo’s water washable resin because it was thinner than the low odor resin I had used previously with other resin printers and I wanted to bring out the details so the prints would come out better. The sandblasted surface build plate provides much stronger adherence, and PFA release liner with easier model removal and less release tension. Additionally, it comes with a set of paper filtering funnels, the power brick, an air purifier module, a user manual, and a USB memory stick with a copy of the manual, Chitubox Basic (the recommended slider for the Elegoo Saturn 2) and some test prints on it.
Great Deal 
New Comment