Cuasting Replacement Belt for Shark NV350 NV351 NV352 NV355 Series Vacuum Cleaner for Shark Navigator Lift-Away 2 Pack

Product Information

You could try dropping a small coin through the hose, and it should come straight through to the other end. Check the motorized floor nozzle to ensure nothing is blocking the rollers, hose, or any debris in the wheels. The beauty of the shark duo is that all the vacuum cleaner parts come apart so that if you do have a blockage, you can see exactly where it is. The model numbers on your Shark refer to the colour and accessories that the vacuum cleaner comes with. Hopefully, this has been able to help you figure out what’s wrong with your Shark vacuum and how to fix it.

2Pcs Vacuum Belt For Shark Navigator Lift-Away Pro NV352

Today, we will show you exactly how easy it is to keep your wooden surfaces spotless with simple tips anyone can do! There’s nothing worse than when your clothes smell musty, especially if you don’t realize it until you are out of the house. Roller will not spin cannot turn roller with fingers pressure cannot move seized there’s no blockage, when turned on green light appears for approx 2 seconds before red light comes on, any advise.You can do this by removing the floor nozzle if you haven’t already, pressing the quick release foot pedal, and looking underneath for any obstructions. Hopefully, this has given you the exact information you need to be able to change your vacuum belt if it ever decides to break on you. The former of these is usually caused by a clog that builds up over time, and as the vacuum runs it causes the motor to overheat.

Shark® Powered Lift-Away™ DuoClean NZ801UK Series Shark® Powered Lift-Away™ DuoClean

All you need to do is remove it from the machine, hold it over the bin, and press the release button. The pliers should only be used as a last resort if there is some really tough dirt stuck on the bar.This post contains affiliate links, and The Organizer UK may earn commissions for purchases made through the links in this post. The vacuum starts spitting out debris when not in use, leaving piles of dirt on the floor as you lift it.

Shark Vacuum Belt Replacement : A Simple Step by Step Guide

Take the screwdriver that is appropriate for your vacuum cleaner and use it to unscrew the roller cover. Put the plate back on, lock it back into place, and then attach the floorhead onto the vacuum cleaner again. There are some models of vacuum cleaner that have an electric connection that will hang down behind the roller cover; don’t be alarmed.

Hi Wende, it sounds like it may be due to a loose connection in the motor if it is an intermittent problem.