Hama Adapter for Samsung TV | Scart Socket to Samsung Plug | for Samsung LED TVs, Black

Product Information

The Rail adapter is fitted to the tail end of the deck, providing more excellent stability at speed and extra grip on deep carves. The aluminum alloy used has elasticity, originally intended to make the part more durable, but also added a layer of suspension between the rider and the ground. So many surfskate and pump tutorials show the rear foot over or even slightly behind the rear wheels. The Waterborne adapter is much more stable at speed than Swelltech’s 360º spinning truck (that powers Swelltech’s surfskate completes like the Jamie O’Brien), and thus better-suited for skateboard transportation. I am part of the very first generation of skateboarders in France, I’ll be soon 59 years old and I still ride as often as I can, but much cooler !

However, if anyone is looking for an inexpensive way to get tighter turns and lots of flowing carvey feel and some pumping action on a drop board, the answer is "yes, you can do that with the Waterbourne adapters. The Surf and Rail Adapters use the new school mount hole pattern and hence can be fitted on decks with either old or new school patterns. If you’re a surfer or have aspirations to be one by converting your regular Longboard into a Surfskate, you can practice surfing techniques when you’re away from the coast or when the wave conditions are poor.You can further customize the feel of your Surfskate by swapping the bushings in your Surf Adapter and Rail Adapter. Each part is made from aircraft grade aluminum for its toughness and lightness, then heat cycled yo ensure stresses are released from within the alloy.

You’ll need 4 hex head bolts and nuts, 4 short Phillips bolts and nuts, and a block riser – all these come with the surf adapter. Through the gateway, I glimpsed majestic creatures: griffins soaring with majestic grace, and unicorns galloping through meadows of iridescent flora.

this waterborne adapter which I attached to one of our popsicle boards gives you more motion to really carve and pump. I had been concerned that I might not like giving up the 2 inches (34"-32") in length from my previous board, but I quickly realized that I liked the shorter deck even more because I feel like I have more control of it.